Documente tehnice
Specificatii
Marca
PilzTensiunea de alimentare
110V ac
Number of Channels
1
Safety Contacts
2
Functie
Emergency Stop
Reset Method
Automatic, Manual, Monitored
Raza actiune
PNOZ X
Safety Category ISO 13849-1
2
Safety Category (ISO 13849-1)
2
PL ISO 13849-1
e
PL (ISO 13849-1)
e
SIL IEC 61508
3
SIL (IEC 61508)
3
Tip terminal
Screw
Serie
PNOZ X7
Latime
22.5mm
Adancime
121mm
Performance Level
e
Lungime
87mm
Detalii produs
PNOZ X7 series by PILZ, Single Channel
The PNOZ X7 range of Safety Relays by PILZ introduces your circuit to a safety related interruption wherein the primary applications are typically in potential hazardous environments where you need that quick power cut off. Particularly useful in automated environments with high foot traffic such as factories, warehouse and the like.
Warning
! This device is not suitable for non-contact barriers as there is no way to initiate a dynamic start and also the unit can be started during the delay-on de-energisation time !
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 172,77
Buc. (fara TVA)
€ 205,60
Buc. (cu TVA)
1
€ 172,77
Buc. (fara TVA)
€ 205,60
Buc. (cu TVA)
1
Documente tehnice
Specificatii
Marca
PilzTensiunea de alimentare
110V ac
Number of Channels
1
Safety Contacts
2
Functie
Emergency Stop
Reset Method
Automatic, Manual, Monitored
Raza actiune
PNOZ X
Safety Category ISO 13849-1
2
Safety Category (ISO 13849-1)
2
PL ISO 13849-1
e
PL (ISO 13849-1)
e
SIL IEC 61508
3
SIL (IEC 61508)
3
Tip terminal
Screw
Serie
PNOZ X7
Latime
22.5mm
Adancime
121mm
Performance Level
e
Lungime
87mm
Detalii produs
PNOZ X7 series by PILZ, Single Channel
The PNOZ X7 range of Safety Relays by PILZ introduces your circuit to a safety related interruption wherein the primary applications are typically in potential hazardous environments where you need that quick power cut off. Particularly useful in automated environments with high foot traffic such as factories, warehouse and the like.
Warning
! This device is not suitable for non-contact barriers as there is no way to initiate a dynamic start and also the unit can be started during the delay-on de-energisation time !