Documente tehnice
Specificatii
Marca
MolexNumar contacte
17
Material de contact
Phosphor Bronze
Pitch
1mm
Montare
Surface Mount
Subtip
Male
Terminal
ZIF Bottom Contact
Body Orientation
Right Angle
Curent nominal
500mA
Tensiune nominala
50 V ac/dc
Dimensiune celula
Easy-On
Dimensiune celula
200528
Number Of Rows
1
Terminal
Solder
Placa contact
Gold over Nickel
Housing Material
Liquid Crystal Polymer
Frecventa minima de auto-rezonanta
-40°C
Temperatura maxima de lucru
+105°C
Tara de origine
Japan
Detalii produs
Molex Easy-On 1.0mm FFC/FPC Connectors with Double-Bottom Contacts, 200528 Series
Easy-On 1.0 mm FFC/FPC connectors with double-bottom contacts and a compact, low profile design with a mating height of just 1.90 mm. The contact design of these Easy-On 1.0 mm FFC/FPC connectors features 2 lower contacts per circuit. This double bottom contact terminal design removes dust and contaminants resulting in a clean mating interface and high contact reliability. This design also provides double the contacts per circuit. The actuators of these Easy-On 1.0 mm FFC/FPC connectors are pre-assembled covers that secure the connection between the FFC/FPC and the connector terminals. The housings of these FFC/FPC connectors feature a cable ear-tab locking feature with indents in them in which accept the FPC tabs. This feature provides proper cable seating and alignment, high retention force and easy actuation. These Easy-On 1.0 mm FFC/FPC connectors also have Zero insertion force for easy cable insertion and for allowing repeat cycling with minimum wear. The top of the housings also feature a vacuum pick and place area for easy board assembly and cost savings. Robust solder tabs on these SMT FFC/FPC connectors offer secure PCB retention and strain relief for solder joints. These Easy-On 1.0 mm FFC/FPC connectors are available in a wide range of circuit sizes for design flexibility.
1.0mm FFC/FPC Connectors – Molex
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 0,43
Buc. (Pe o rola de 3000) (fara TVA)
€ 0,512
Buc. (Pe o rola de 3000) (cu TVA)
3000
€ 0,43
Buc. (Pe o rola de 3000) (fara TVA)
€ 0,512
Buc. (Pe o rola de 3000) (cu TVA)
3000
Documente tehnice
Specificatii
Marca
MolexNumar contacte
17
Material de contact
Phosphor Bronze
Pitch
1mm
Montare
Surface Mount
Subtip
Male
Terminal
ZIF Bottom Contact
Body Orientation
Right Angle
Curent nominal
500mA
Tensiune nominala
50 V ac/dc
Dimensiune celula
Easy-On
Dimensiune celula
200528
Number Of Rows
1
Terminal
Solder
Placa contact
Gold over Nickel
Housing Material
Liquid Crystal Polymer
Frecventa minima de auto-rezonanta
-40°C
Temperatura maxima de lucru
+105°C
Tara de origine
Japan
Detalii produs
Molex Easy-On 1.0mm FFC/FPC Connectors with Double-Bottom Contacts, 200528 Series
Easy-On 1.0 mm FFC/FPC connectors with double-bottom contacts and a compact, low profile design with a mating height of just 1.90 mm. The contact design of these Easy-On 1.0 mm FFC/FPC connectors features 2 lower contacts per circuit. This double bottom contact terminal design removes dust and contaminants resulting in a clean mating interface and high contact reliability. This design also provides double the contacts per circuit. The actuators of these Easy-On 1.0 mm FFC/FPC connectors are pre-assembled covers that secure the connection between the FFC/FPC and the connector terminals. The housings of these FFC/FPC connectors feature a cable ear-tab locking feature with indents in them in which accept the FPC tabs. This feature provides proper cable seating and alignment, high retention force and easy actuation. These Easy-On 1.0 mm FFC/FPC connectors also have Zero insertion force for easy cable insertion and for allowing repeat cycling with minimum wear. The top of the housings also feature a vacuum pick and place area for easy board assembly and cost savings. Robust solder tabs on these SMT FFC/FPC connectors offer secure PCB retention and strain relief for solder joints. These Easy-On 1.0 mm FFC/FPC connectors are available in a wide range of circuit sizes for design flexibility.