Documente tehnice
Specificatii
Marca
MoflashTensiunea de alimentare
100 → 240 V ac
Light Effect
Flashing
Culoare lentila
Amber
Montare
Wall Mount
Tip bec
Xenon
Current Type
AC
Culoare carcasa
Black
Lampa inclusa
Yes
Serie
X 450
Inaltime
68mm
Base Length
105mm
Base Width
105mm
Maximum Temperature
+70°C
Tara de origine
France
Detalii produs
Industrial & Marine Xenon Beacon, X450 Series
The X450 Xenon beacon is suitable for Industrial & Marine signalling applications where a visual signal is required to operate in very harsh environmental conditions.
The beacons have a flashing mode light effect (single stage alarm). Xenon beacons (sometimes called strobes) are controlled via a PCB and put out a very brief but bright flash of white light by ionizing and the discharging a large current through the xenon gas in the tube.
This warning beacon has multiple flash rate settings, that can be set at installation, that range from 60 flashes per minute up to 180 flashes per minute to create a more noticeable warning signal to the human eye. The design of this beacon allows for termination in the base.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
P.O.A.
1
P.O.A.
1
Documente tehnice
Specificatii
Marca
MoflashTensiunea de alimentare
100 → 240 V ac
Light Effect
Flashing
Culoare lentila
Amber
Montare
Wall Mount
Tip bec
Xenon
Current Type
AC
Culoare carcasa
Black
Lampa inclusa
Yes
Serie
X 450
Inaltime
68mm
Base Length
105mm
Base Width
105mm
Maximum Temperature
+70°C
Tara de origine
France
Detalii produs
Industrial & Marine Xenon Beacon, X450 Series
The X450 Xenon beacon is suitable for Industrial & Marine signalling applications where a visual signal is required to operate in very harsh environmental conditions.
The beacons have a flashing mode light effect (single stage alarm). Xenon beacons (sometimes called strobes) are controlled via a PCB and put out a very brief but bright flash of white light by ionizing and the discharging a large current through the xenon gas in the tube.
This warning beacon has multiple flash rate settings, that can be set at installation, that range from 60 flashes per minute up to 180 flashes per minute to create a more noticeable warning signal to the human eye. The design of this beacon allows for termination in the base.