Documente tehnice
Specificatii
Marca
MicrochipNumber of Supervisors
1
Output Driver
Active Low, Open Drain
Montare
Surface Mount
Maximum Reset Active Time
700ms
Tip pachet
SOT-23
Numar pini
3
Dimensiuni
2.9 x 1.3 x 0.95mm
Maximum Monitored Voltage
4.5V
Maximum Operating Supply Voltage
5.5 V
Temperatura minima de lucru
-40 °C
Temperatura maxima de lucru
+85 °C
Minimum Operating Supply Voltage
1 V
Minimum Monitored Voltage
4.37V
Tara de origine
Thailand
Detalii produs
MCP130 Microcontroller Supervisory and Reset Circuit
The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.
Supervisory & Reset Circuits - Microchip
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 0,62
Buc. (Intr-un pachet de 10) (fara TVA)
€ 0,738
Buc. (Intr-un pachet de 10) (cu TVA)
10
€ 0,62
Buc. (Intr-un pachet de 10) (fara TVA)
€ 0,738
Buc. (Intr-un pachet de 10) (cu TVA)
10
Cumpara in pachete mari
Cantitate | Pret unitar | Per Pachet |
---|---|---|
10 - 90 | € 0,62 | € 6,20 |
100 - 240 | € 0,55 | € 5,50 |
250 - 490 | € 0,51 | € 5,10 |
500 - 990 | € 0,46 | € 4,60 |
1000+ | € 0,42 | € 4,20 |
Documente tehnice
Specificatii
Marca
MicrochipNumber of Supervisors
1
Output Driver
Active Low, Open Drain
Montare
Surface Mount
Maximum Reset Active Time
700ms
Tip pachet
SOT-23
Numar pini
3
Dimensiuni
2.9 x 1.3 x 0.95mm
Maximum Monitored Voltage
4.5V
Maximum Operating Supply Voltage
5.5 V
Temperatura minima de lucru
-40 °C
Temperatura maxima de lucru
+85 °C
Minimum Operating Supply Voltage
1 V
Minimum Monitored Voltage
4.37V
Tara de origine
Thailand
Detalii produs
MCP130 Microcontroller Supervisory and Reset Circuit
The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.