Honeywell BAF Series Plunger Limit Switch, NO/NC, SPDT, Die Cast Aluminium Housing, 480V ac Max, 20A Max
Documente tehnice
Specificatii
Marca
HoneywellActuator Type
Plunger
Pole and Throw Configuration
SPDT
Normal State Configuration
NO/NC
Maximum Current
20A
Housing Material
Die Cast Aluminium
Maximum AC Voltage
480V
Maximum DC Voltage
250V
Tip conexiune
1/2 in NPT
Serie
BAF
Tip actionare
Snap Action
Lungime
101.6mm
Adancime
33mm
Latime
54.8mm
Temperatura maxima de lucru
+71°C
Temperatura minima de lucru
-32°C
Montare
Vertical
Tara de origine
United States
Detalii produs
BAF Medium Duty Limit Switches
The BAF limit switch series from Honeywell is designed for use within a medium duty environment. The elastomer boot on sealed actuator verions protects the actuating mechanism and the internal basic switch from contaminants. There is a seal gasket between the cover plate and the enclosures on all versions. The cover plate is removed for ease of wiring and switch replacement without demounting the switch. The actuator position is designated "right" or "left," when looking at the nameplate.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 304,29
€ 304,29 Buc. (fara TVA)
€ 362,11
€ 362,11 Buc. (cu TVA)
1
€ 304,29
€ 304,29 Buc. (fara TVA)
€ 362,11
€ 362,11 Buc. (cu TVA)
1
Cumpara in pachete mari
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 304,29 |
| 5 - 9 | € 289,98 |
| 10+ | € 273,04 |
Documente tehnice
Specificatii
Marca
HoneywellActuator Type
Plunger
Pole and Throw Configuration
SPDT
Normal State Configuration
NO/NC
Maximum Current
20A
Housing Material
Die Cast Aluminium
Maximum AC Voltage
480V
Maximum DC Voltage
250V
Tip conexiune
1/2 in NPT
Serie
BAF
Tip actionare
Snap Action
Lungime
101.6mm
Adancime
33mm
Latime
54.8mm
Temperatura maxima de lucru
+71°C
Temperatura minima de lucru
-32°C
Montare
Vertical
Tara de origine
United States
Detalii produs
BAF Medium Duty Limit Switches
The BAF limit switch series from Honeywell is designed for use within a medium duty environment. The elastomer boot on sealed actuator verions protects the actuating mechanism and the internal basic switch from contaminants. There is a seal gasket between the cover plate and the enclosures on all versions. The cover plate is removed for ease of wiring and switch replacement without demounting the switch. The actuator position is designated "right" or "left," when looking at the nameplate.