Documente tehnice
Specificatii
Marca
FestoStroke
50mm
Alezaj
16mm
Producator
DFM
Tip actionare
Double
Presiune maxima de operare
10 bar
Cushioning Type
Elastic
Model
170837
Model
170837
Dimensiuni
117 x 67 x 32mm
Greutate
772g
Temperatura maxima de lucru
+80°C
Lungime
117mm
Absolute Maximum Pressure
1 Mpa
Inaltime
32mm
Frecventa minima de auto-rezonanta
-20°C
Latime
67mm
Tara de origine
Germany
Detalii produs
DFM Pneumatic Guided Cylinders - Slide Bearing
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications such as clamping, stopping, material handling and lifting. The sturdy and precise aluminium construction is maintenance free and highly resistant to torque and lateral external forces. A compact design incorporates the piston rod as part of the guide body.
The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. Integrated slots on the actuator body allow for incorporating proximity sensors to measure the linear motion of the piston. Air supply ports on both the top and side of the cylinder provide flexible positioning options.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 315,22
Buc. (fara TVA)
€ 375,11
Buc. (cu TVA)
1
€ 315,22
Buc. (fara TVA)
€ 375,11
Buc. (cu TVA)
1
Documente tehnice
Specificatii
Marca
FestoStroke
50mm
Alezaj
16mm
Producator
DFM
Tip actionare
Double
Presiune maxima de operare
10 bar
Cushioning Type
Elastic
Model
170837
Model
170837
Dimensiuni
117 x 67 x 32mm
Greutate
772g
Temperatura maxima de lucru
+80°C
Lungime
117mm
Absolute Maximum Pressure
1 Mpa
Inaltime
32mm
Frecventa minima de auto-rezonanta
-20°C
Latime
67mm
Tara de origine
Germany
Detalii produs
DFM Pneumatic Guided Cylinders - Slide Bearing
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications such as clamping, stopping, material handling and lifting. The sturdy and precise aluminium construction is maintenance free and highly resistant to torque and lateral external forces. A compact design incorporates the piston rod as part of the guide body.
The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. Integrated slots on the actuator body allow for incorporating proximity sensors to measure the linear motion of the piston. Air supply ports on both the top and side of the cylinder provide flexible positioning options.