Documente tehnice
Specificatii
Marca
BlockSerie
PEL Neo
AC or DC Input Voltage
ac, dc
Tensiune intrare
120 → 373 V dc, 85 → 264 V ac
AC or DC Output Voltage
dc
Tensiune iesire
24V dc
Curent iesire
4A
Putere
96W
Numar iesiri
1
Inaltime
89mm
Latime
59mm
Adancime
59mm
Temperatura minima
-25°C
Efficiency
88.0%
Ripple And Noise
100mV
Tensiune iesire
22.8 to 26.4V
Caracteristici speciale
DC OK Signalling via LEDs, Panel Installation on Mounting Rails, Push-In Terminals, Stabilised & Adjustable Output Voltage
Maximum Temperature
+55°C
Montare
DIN Rail Mount
Tara de origine
Germany
Detalii produs
PEL Neo – Single Phase SMPS
The single phase switched mode power supply (SMPS) from Block is highly efficient and has a stabilised and adjustable output voltage. Equipped with a wide input range of 85 V ac to 264 V ac. All models have push in terminals so they can be connected quickly. DC OK signalling via LEDs indicate the status of the output and enables visual evaluation of the process.
Approvals
UL/CSA60950 recognised (E213214), UL508 listed (E219022), Germanischer Loyd
Standards
Primary SMPS to UL60950, UL508
Safety: EN61558-2-16, EN60950-1
EMC: EN61204-3
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
P.O.A.
1
P.O.A.
1
Documente tehnice
Specificatii
Marca
BlockSerie
PEL Neo
AC or DC Input Voltage
ac, dc
Tensiune intrare
120 → 373 V dc, 85 → 264 V ac
AC or DC Output Voltage
dc
Tensiune iesire
24V dc
Curent iesire
4A
Putere
96W
Numar iesiri
1
Inaltime
89mm
Latime
59mm
Adancime
59mm
Temperatura minima
-25°C
Efficiency
88.0%
Ripple And Noise
100mV
Tensiune iesire
22.8 to 26.4V
Caracteristici speciale
DC OK Signalling via LEDs, Panel Installation on Mounting Rails, Push-In Terminals, Stabilised & Adjustable Output Voltage
Maximum Temperature
+55°C
Montare
DIN Rail Mount
Tara de origine
Germany
Detalii produs
PEL Neo – Single Phase SMPS
The single phase switched mode power supply (SMPS) from Block is highly efficient and has a stabilised and adjustable output voltage. Equipped with a wide input range of 85 V ac to 264 V ac. All models have push in terminals so they can be connected quickly. DC OK signalling via LEDs indicate the status of the output and enables visual evaluation of the process.
Approvals
UL/CSA60950 recognised (E213214), UL508 listed (E219022), Germanischer Loyd
Standards
Primary SMPS to UL60950, UL508
Safety: EN61558-2-16, EN60950-1
EMC: EN61204-3