Adafruit 2478, TFT LCD Display 2.4in Resistive Touch Screen Display Module for MicroSD Socket - ILI9341
Documente tehnice
Specificatii
Marca
ADAFRUIT INDUSTRIESDiagonala display
2.4in
Tehnologie display
Resistive Touch Screen
Clasificare
Display Module
Kit Name
TFT LCD Display
Utilizare cu
MicroSD Socket - ILI9341
Tehnologie
TFT Display
Clasificare
LCD Touchscreen
Tara de origine
United States
Detalii produs
Adafruit 2.4 inch TFT LCD Touchscreen Breakout Board with microSD Socket
This colour 2.4” TFT display has 4 bright white LED backlight and 240 x 320 pixels with individual RGB pixel control. It has a resistive touchscreen to detect finger presses anywhere on the screen. The built-in controller has RAM buffering to take the workload away from the microcontroller. This display board has two modes: 8-bit and SPI.
When using 8-bit mode, you need 8 digital data lines and 4 or 5 digital control lines to read and write to the display.
SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and dc) but is slower than 8-bit mode.
In addition, 4 pins are required for the touch screen (2 digital, 2 analogue).
If you are using SPI mode, you can also take advantage of the on-board micro-SD card socket.
Adafruit LCD Touchscreens
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 35,18
Buc. (fara TVA)
€ 41,86
Buc. (cu TVA)
1
€ 35,18
Buc. (fara TVA)
€ 41,86
Buc. (cu TVA)
1
Cumpara in pachete mari
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 35,18 |
| 5 - 9 | € 30,79 |
| 10+ | € 27,78 |
Documente tehnice
Specificatii
Marca
ADAFRUIT INDUSTRIESDiagonala display
2.4in
Tehnologie display
Resistive Touch Screen
Clasificare
Display Module
Kit Name
TFT LCD Display
Utilizare cu
MicroSD Socket - ILI9341
Tehnologie
TFT Display
Clasificare
LCD Touchscreen
Tara de origine
United States
Detalii produs
Adafruit 2.4 inch TFT LCD Touchscreen Breakout Board with microSD Socket
This colour 2.4” TFT display has 4 bright white LED backlight and 240 x 320 pixels with individual RGB pixel control. It has a resistive touchscreen to detect finger presses anywhere on the screen. The built-in controller has RAM buffering to take the workload away from the microcontroller. This display board has two modes: 8-bit and SPI.
When using 8-bit mode, you need 8 digital data lines and 4 or 5 digital control lines to read and write to the display.
SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and dc) but is slower than 8-bit mode.
In addition, 4 pins are required for the touch screen (2 digital, 2 analogue).
If you are using SPI mode, you can also take advantage of the on-board micro-SD card socket.