Weidmüller WTA Series Test Adapter for Use with DIN Rail Terminal Blocks

Nr. stoc RS: 235-5302Producator: WeidmüllerCod de producator: 1632330000
brand-logo

Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)

Specificatii

Product Type

Test Adapter

Tip accesoriu

Test Adapter

Serie

WTA

Utilizare cu

DIN Rail Terminal Blocks

Standards/Approvals

UL/CSA, IEC 947-7-1

Hazardous Area Certification

No

Tara de origine

Germany

Detalii produs

Test Adaptor System

Quick and efficient testing of Weidmuller "W" series terminals is achieved with WTA adaptors. The spring legs mean they can be applied by "finger & thumb" pressure, ie no snap on points to break. Test cable of up to 1.5mm² is fitted to the topside screw clamp terminal (WTA4 has two termination screws) facilitating easy assembly. Adaptors of the same type may be snapped together (as they are the same pitch as the terminals they fit) to make adaptor banks so that any number of consecutive terminals can be tested. Standard W series markers can be fitted for identification.

Informatii despre stoc temporar indisponibile

€ 7,89

€ 7,89 Buc. (fara TVA)

€ 9,55

€ 9,55 Buc. (cu TVA)

Weidmüller WTA Series Test Adapter for Use with DIN Rail Terminal Blocks

€ 7,89

€ 7,89 Buc. (fara TVA)

€ 9,55

€ 9,55 Buc. (cu TVA)

Weidmüller WTA Series Test Adapter for Use with DIN Rail Terminal Blocks

Informatii despre stoc temporar indisponibile

Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)

Specificatii

Product Type

Test Adapter

Tip accesoriu

Test Adapter

Serie

WTA

Utilizare cu

DIN Rail Terminal Blocks

Standards/Approvals

UL/CSA, IEC 947-7-1

Hazardous Area Certification

No

Tara de origine

Germany

Detalii produs

Test Adaptor System

Quick and efficient testing of Weidmuller "W" series terminals is achieved with WTA adaptors. The spring legs mean they can be applied by "finger & thumb" pressure, ie no snap on points to break. Test cable of up to 1.5mm² is fitted to the topside screw clamp terminal (WTA4 has two termination screws) facilitating easy assembly. Adaptors of the same type may be snapped together (as they are the same pitch as the terminals they fit) to make adaptor banks so that any number of consecutive terminals can be tested. Standard W series markers can be fitted for identification.