TE Connectivity

Nr. stoc RS: 441-4380Producator: TE ConnectivityCod de producator: URHR-3-CS-2065-0
brand-logo

Documente tehnice

Specificatii

Cable Clip/Clamp Style

Heat Shrink Grommets

Tara de origine

United States

Detalii produs

Cable Clamp Heat Shrink Grommets

ShrinkHoop™ grommet (URHR) is a high ratio heat-shrinkable strain-relief grommet that can be placed over the cable assembly after the connector pinning operation is complete. Shrunk down, these rings are highly conformable and fill the space between the clamp-type connector assembly and the cable. Re-entry is a simple operation, simply soften the ShrinkHoop™ grommet by heating and enlarge the ring by inserting a non-metallic probe through the centre of the wire bundle. The grommet will remain enlarged on cooling, allowing wires to be added, removed or reworked. Once rework is completed, simply heat the grommet until it shrinks down again before positioning and clamping back into place.

Standards

MIL-I-81765/1 Type 1

Informatii despre stoc temporar indisponibile.

Incercati din nou mai tarziu

Informatii despre stoc temporar indisponibile.

€ 9,08

Buc. (Intr-un pachet de 10) (fara TVA)

€ 10,805

Buc. (Intr-un pachet de 10) (cu TVA)

TE Connectivity

€ 9,08

Buc. (Intr-un pachet de 10) (fara TVA)

€ 10,805

Buc. (Intr-un pachet de 10) (cu TVA)

TE Connectivity
Informatii despre stoc temporar indisponibile.

Documente tehnice

Specificatii

Cable Clip/Clamp Style

Heat Shrink Grommets

Tara de origine

United States

Detalii produs

Cable Clamp Heat Shrink Grommets

ShrinkHoop™ grommet (URHR) is a high ratio heat-shrinkable strain-relief grommet that can be placed over the cable assembly after the connector pinning operation is complete. Shrunk down, these rings are highly conformable and fill the space between the clamp-type connector assembly and the cable. Re-entry is a simple operation, simply soften the ShrinkHoop™ grommet by heating and enlarge the ring by inserting a non-metallic probe through the centre of the wire bundle. The grommet will remain enlarged on cooling, allowing wires to be added, removed or reworked. Once rework is completed, simply heat the grommet until it shrinks down again before positioning and clamping back into place.

Standards

MIL-I-81765/1 Type 1