Modificări în Graficul Livrărilor!

Comenzile plasate în perioada 18.12.2024 - 07.01.2025 vor fi livrate începând cu 08.01.2025. COMPEC va fi închis în perioada 23.12.2024 - 07.01.2025. Începând cu data de 08.01.2025 expedierile vor fi realizate conform graficului obișnuit.

TE Connectivity DuraSeal Series Insulated Tin Plated Crimp Ring Terminal, M5 Stud Size, 1.5mm² to 2.5mm², 16AWG

Nr. stoc RS: 465-659Producator: TE ConnectivityCod de producator: DR-6-50
brand-logo

Documente tehnice

Specificatii

Serie

Duraseal

Insulation

Insulated

Insulation Material

Nylon

Inner Ring Diameter

5.3mm

Outer Ring Diameter

10mm

Minimum Wire Size mm²

1.5mm²

Maximum Wire Size mm²

2.5mm²

Minimum Wire Size AWG

16AWG

Maximum Wire Size AWG

14AWG

Dimensiunea stift

M5

Culoare

Blue

Placa contact

Tin

Material de contact

Copper Alloy

Grosime

2mm

Lungime totala

32mm

Tara de origine

Mexico

Detalii produs

TE Connectivity DuraSeal Ring Terminals

DuraSeal crimp ring terminals with an environmentally sealed wire connection providing insulation and protection to electrical connections from mechanical abuse, vibration, wire-pull out, abrasion as well as being resistant to water, salt and other contaminants. The barrels of these DuraSeal crimp ring terminals are covered in a heat-shrinkable nylon tubing lined with a hot-melt adhesive with is cut and abrasion resistant.

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

Approvals

UL Listed

S-ar putea să te intereseze

Informatii indisponibile despre stoc

Incercati din nou mai tarziu

Informatii indisponibile despre stoc

€ 0,44

Buc. (Intr-un pachet de 50) (fara TVA)

€ 0,524

Buc. (Intr-un pachet de 50) (cu TVA)

TE Connectivity DuraSeal Series Insulated Tin Plated Crimp Ring Terminal, M5 Stud Size, 1.5mm² to 2.5mm², 16AWG

€ 0,44

Buc. (Intr-un pachet de 50) (fara TVA)

€ 0,524

Buc. (Intr-un pachet de 50) (cu TVA)

TE Connectivity DuraSeal Series Insulated Tin Plated Crimp Ring Terminal, M5 Stud Size, 1.5mm² to 2.5mm², 16AWG
Informatii indisponibile despre stoc

Cumpara in pachete mari

CantitatePret unitarPer Pachet
50 - 200€ 0,44€ 22,00
250 - 450€ 0,39€ 19,50
500 - 1200€ 0,38€ 19,00
1250 - 2450€ 0,34€ 17,00
2500+€ 0,31€ 15,50
S-ar putea să te intereseze

Documente tehnice

Specificatii

Serie

Duraseal

Insulation

Insulated

Insulation Material

Nylon

Inner Ring Diameter

5.3mm

Outer Ring Diameter

10mm

Minimum Wire Size mm²

1.5mm²

Maximum Wire Size mm²

2.5mm²

Minimum Wire Size AWG

16AWG

Maximum Wire Size AWG

14AWG

Dimensiunea stift

M5

Culoare

Blue

Placa contact

Tin

Material de contact

Copper Alloy

Grosime

2mm

Lungime totala

32mm

Tara de origine

Mexico

Detalii produs

TE Connectivity DuraSeal Ring Terminals

DuraSeal crimp ring terminals with an environmentally sealed wire connection providing insulation and protection to electrical connections from mechanical abuse, vibration, wire-pull out, abrasion as well as being resistant to water, salt and other contaminants. The barrels of these DuraSeal crimp ring terminals are covered in a heat-shrinkable nylon tubing lined with a hot-melt adhesive with is cut and abrasion resistant.

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

Approvals

UL Listed

S-ar putea să te intereseze