TE Connectivity Blue Polyolefin Solder Sleeve 42mm Length 1.8 → 4.5mm Cable Diameter

Nr. stoc RS: 136-2081Producator: TE ConnectivityCod de producator: B-155-9003
brand-logo

Documente tehnice

Specificatii

Minimum Cable Diameter

1.8mm

Maximum Cable Diameter

4.5mm

Sleeve Length

42mm

Material

Polyolefin

Frecventa minima de auto-rezonanta

-55°C

Temperatura maxima de lucru

+125°C

Cantitate

2

Culoare

Blue

Shrink Temperature

+85°C

Dimensiune celula

B-155

Standarde

ANSI J-STD-004, ANSI J-STD-006

Tara de origine

Mexico

Detalii produs

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.

Informatii despre stoc temporar indisponibile.

Incercati din nou mai tarziu

Informatii despre stoc temporar indisponibile.

€ 92,59

1 Box of 100 (fara TVA)

€ 110,18

1 Box of 100 (cu TVA)

TE Connectivity Blue Polyolefin Solder Sleeve 42mm Length 1.8 → 4.5mm Cable Diameter

€ 92,59

1 Box of 100 (fara TVA)

€ 110,18

1 Box of 100 (cu TVA)

TE Connectivity Blue Polyolefin Solder Sleeve 42mm Length 1.8 → 4.5mm Cable Diameter
Informatii despre stoc temporar indisponibile.

Documente tehnice

Specificatii

Minimum Cable Diameter

1.8mm

Maximum Cable Diameter

4.5mm

Sleeve Length

42mm

Material

Polyolefin

Frecventa minima de auto-rezonanta

-55°C

Temperatura maxima de lucru

+125°C

Cantitate

2

Culoare

Blue

Shrink Temperature

+85°C

Dimensiune celula

B-155

Standarde

ANSI J-STD-004, ANSI J-STD-006

Tara de origine

Mexico

Detalii produs

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.