Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
TE ConnectivityProduct Type
Solder Sleeve
Sub Type
Terminator
Sleeve Length
42mm
Material
Polyolefin
Dielectric
2kV
Minimum Cable Diameter
1.3mm
Maximum Cable Diameter
2.7mm
Culoare
Red
Temperatura minima de lucru
-55°C
Temperatura maxima de lucru
125°C
Standards/Approvals
ANSI J-STD-004, ANSI J-STD-006
Shrink Temperature
85°C
Serie
B-155
Tara de origine
Mexico
Detalii produs
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
Informatii despre stoc temporar indisponibile
€ 78,57
€ 78,57 1 Box of 100 (fara TVA)
€ 95,07
€ 95,07 1 Box of 100 (cu TVA)
1
€ 78,57
€ 78,57 1 Box of 100 (fara TVA)
€ 95,07
€ 95,07 1 Box of 100 (cu TVA)
Informatii despre stoc temporar indisponibile
1
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
TE ConnectivityProduct Type
Solder Sleeve
Sub Type
Terminator
Sleeve Length
42mm
Material
Polyolefin
Dielectric
2kV
Minimum Cable Diameter
1.3mm
Maximum Cable Diameter
2.7mm
Culoare
Red
Temperatura minima de lucru
-55°C
Temperatura maxima de lucru
125°C
Standards/Approvals
ANSI J-STD-004, ANSI J-STD-006
Shrink Temperature
85°C
Serie
B-155
Tara de origine
Mexico
Detalii produs
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
