TE Connectivity Transparent Polyolefin Solder Sleeve 32.5mm Length 2.8 → 7.3mm Cable Diameter
Documente tehnice
Specificatii
Marca
TE ConnectivityMinimum Cable Diameter
2.8mm
Maximum Cable Diameter
7.3mm
Sleeve Length
32.5mm
Material
Polyolefin
Frecventa minima de auto-rezonanta
-55°C
Temperatura maxima de lucru
+125°C
Cantitate
1
Culoare
Transparent
Dimensiune celula
B-155
Shrink Temperature
+85°C
Standarde
ANSI J-STD-004, ANSI J-STD-006
Tara de origine
Mexico
Detalii produs
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 1,52
Buc. (Intr-un pachet de 100) (fara TVA)
€ 1,809
Buc. (Intr-un pachet de 100) (cu TVA)
100
€ 1,52
Buc. (Intr-un pachet de 100) (fara TVA)
€ 1,809
Buc. (Intr-un pachet de 100) (cu TVA)
100
Cumpara in pachete mari
| Cantitate | Pret unitar | Per Pachet |
|---|---|---|
| 100 - 1400 | € 1,52 | € 152,00 |
| 1500 - 4900 | € 1,39 | € 139,00 |
| 5000+ | € 1,30 | € 130,00 |
Documente tehnice
Specificatii
Marca
TE ConnectivityMinimum Cable Diameter
2.8mm
Maximum Cable Diameter
7.3mm
Sleeve Length
32.5mm
Material
Polyolefin
Frecventa minima de auto-rezonanta
-55°C
Temperatura maxima de lucru
+125°C
Cantitate
1
Culoare
Transparent
Dimensiune celula
B-155
Shrink Temperature
+85°C
Standarde
ANSI J-STD-004, ANSI J-STD-006
Tara de origine
Mexico
Detalii produs
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.