Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
TE ConnectivityTip produs
Tab
Subtip
Female
Serie
Duraseal
Minimum Wire Size mm²
0.3mm²
Maximum Wire Size mm²
0.9mm²
Tab Size
6.35 x 0.8mm
Insulation
Insulated
Minimum Wire Size AWG
22AWG
Maximum Wire Size AWG
18AWG
Terminal
Crimp
Culoare
Red
Material de contact
Brass
Placa contact
Tin
Insulation Material
Nylon
Tara de origine
Mexico
Detalii produs
Waterproof Duraseal terminals
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
€ 23,35
€ 23,35 1 Box of 25 (fara TVA)
€ 28,25
€ 28,25 1 Box of 25 (cu TVA)
1
€ 23,35
€ 23,35 1 Box of 25 (fara TVA)
€ 28,25
€ 28,25 1 Box of 25 (cu TVA)
Informatii despre stoc temporar indisponibile
1
Informatii despre stoc temporar indisponibile
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 23,35 |
| 5 - 24 | € 20,59 |
| 25+ | € 18,69 |
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
TE ConnectivityTip produs
Tab
Subtip
Female
Serie
Duraseal
Minimum Wire Size mm²
0.3mm²
Maximum Wire Size mm²
0.9mm²
Tab Size
6.35 x 0.8mm
Insulation
Insulated
Minimum Wire Size AWG
22AWG
Maximum Wire Size AWG
18AWG
Terminal
Crimp
Culoare
Red
Material de contact
Brass
Placa contact
Tin
Insulation Material
Nylon
Tara de origine
Mexico
Detalii produs
Waterproof Duraseal terminals
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
