Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
TE ConnectivityProduct Type
Ring Terminal
Series
DuraSeal
Insulation
Insulated
Insulation Material
Nylon
Outer Ring Diameter
8mm
Inner Ring Diameter
4.3mm
Minimum Wire Size AWG
16AWG
Maximum Wire Size AWG
14AWG
Lungime totala
33.02mm
Dimensiunea stift
M4
Culoare
Blue
Material de contact
Copper
Placa contact
Tin
Standards/Approvals
No
Temperatura maxima de lucru
125°C
Minimum Wire Size mm²
1.5mm²
Temperatura minima de lucru
-55°C
Maximum Wire Size mm²
2.5mm²
Tara de origine
Mexico
Detalii produs
Waterproof Duraseal terminals
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Informatii despre stoc temporar indisponibile
P.O.A.
1
P.O.A.
Informatii despre stoc temporar indisponibile
1
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
TE ConnectivityProduct Type
Ring Terminal
Series
DuraSeal
Insulation
Insulated
Insulation Material
Nylon
Outer Ring Diameter
8mm
Inner Ring Diameter
4.3mm
Minimum Wire Size AWG
16AWG
Maximum Wire Size AWG
14AWG
Lungime totala
33.02mm
Dimensiunea stift
M4
Culoare
Blue
Material de contact
Copper
Placa contact
Tin
Standards/Approvals
No
Temperatura maxima de lucru
125°C
Minimum Wire Size mm²
1.5mm²
Temperatura minima de lucru
-55°C
Maximum Wire Size mm²
2.5mm²
Tara de origine
Mexico
Detalii produs
Waterproof Duraseal terminals
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
