Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
TE ConnectivityTip produs
Tab
Serie
Duraseal
Minimum Wire Size mm²
1.5mm²
Subtip
Male
Maximum Wire Size mm²
2.5mm²
Tab Size
6.35 x 0.8mm
Tab Width
6.35mm
Tab Thickness
0.8mm
Insulation
Insulated
Minimum Wire Size AWG
16AWG
Maximum Wire Size AWG
14AWG
Terminal
Crimp
Culoare
Blue
Material de contact
Brass
Placa contact
Tin
Insulation Material
Nylon
Tara de origine
Mexico
Detalii produs
Duraseal Blade
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
€ 387,50
€ 1,55 Each (Supplied in a Bag) (fara TVA)
€ 468,88
€ 1,876 Each (Supplied in a Bag) (cu TVA)
Impachetare pentru productie (Punga)
250
€ 387,50
€ 1,55 Each (Supplied in a Bag) (fara TVA)
€ 468,88
€ 1,876 Each (Supplied in a Bag) (cu TVA)
Informatii despre stoc temporar indisponibile
Impachetare pentru productie (Punga)
250
Informatii despre stoc temporar indisponibile
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
TE ConnectivityTip produs
Tab
Serie
Duraseal
Minimum Wire Size mm²
1.5mm²
Subtip
Male
Maximum Wire Size mm²
2.5mm²
Tab Size
6.35 x 0.8mm
Tab Width
6.35mm
Tab Thickness
0.8mm
Insulation
Insulated
Minimum Wire Size AWG
16AWG
Maximum Wire Size AWG
14AWG
Terminal
Crimp
Culoare
Blue
Material de contact
Brass
Placa contact
Tin
Insulation Material
Nylon
Tara de origine
Mexico
Detalii produs
Duraseal Blade
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
