TE Connectivity, DuraSeal Butt Splice Connector, Blue, Insulated, Tin 10 AWG
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
TE ConnectivitySplice Type
Butt
Product Type
Splice Connector
Lungime totala
31.5mm
Diametru
4.6 mm
Minimum Wire Size AWG
26 AWG
Insulation
Insulated
Maximum Wire Size AWG
10 AWG
Culoare
Blue
Insulation Material
Nylon
Serie
DuraSeal
Material de contact
Copper
Terminal
Crimp
Placa contact
Tin
Standards/Approvals
No
Tara de origine
Mexico
Detalii produs
Splices
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Informatii despre stoc temporar indisponibile
€ 432,50
€ 1,73 Each (Supplied in a Bag) (fara TVA)
€ 523,32
€ 2,093 Each (Supplied in a Bag) (cu TVA)
Impachetare pentru productie (Punga)
250
€ 432,50
€ 1,73 Each (Supplied in a Bag) (fara TVA)
€ 523,32
€ 2,093 Each (Supplied in a Bag) (cu TVA)
Informatii despre stoc temporar indisponibile
Impachetare pentru productie (Punga)
250
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
TE ConnectivitySplice Type
Butt
Product Type
Splice Connector
Lungime totala
31.5mm
Diametru
4.6 mm
Minimum Wire Size AWG
26 AWG
Insulation
Insulated
Maximum Wire Size AWG
10 AWG
Culoare
Blue
Insulation Material
Nylon
Serie
DuraSeal
Material de contact
Copper
Terminal
Crimp
Placa contact
Tin
Standards/Approvals
No
Tara de origine
Mexico
Detalii produs
Splices
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed