TE Connectivity, DuraSeal Butt Splice Connector, Blue, Insulated, Tin 16 → 14 AWG

Nr. stoc RS: 135-5110Producator: TE ConnectivityCod de producator: 454100-000
brand-logo

Documente tehnice

Specificatii

Splice Type

Butt

Dimensiune fir

16 → 14 AWG

Lungime totala

31.5mm

Diametru

4.6mm

Insulation

Insulated

Culoare

Blue

Dimensiune celula

Duraseal

Material de contact

Copper

Placa contact

Tin

Tara de origine

Mexico

Detalii produs

Splices

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

Approvals

UL Listed

Informatii indisponibile despre stoc

Incercati din nou mai tarziu

Informatii indisponibile despre stoc

€ 809,90

1 Box of 1000 (fara TVA)

€ 963,78

1 Box of 1000 (cu TVA)

TE Connectivity, DuraSeal Butt Splice Connector, Blue, Insulated, Tin 16 → 14 AWG

€ 809,90

1 Box of 1000 (fara TVA)

€ 963,78

1 Box of 1000 (cu TVA)

TE Connectivity, DuraSeal Butt Splice Connector, Blue, Insulated, Tin 16 → 14 AWG
Informatii indisponibile despre stoc

Documente tehnice

Specificatii

Splice Type

Butt

Dimensiune fir

16 → 14 AWG

Lungime totala

31.5mm

Diametru

4.6mm

Insulation

Insulated

Culoare

Blue

Dimensiune celula

Duraseal

Material de contact

Copper

Placa contact

Tin

Tara de origine

Mexico

Detalii produs

Splices

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

Approvals

UL Listed