TE Connectivity Straight, Fluid Resistant Elastomer, 25mm
Documente tehnice
Specificatii
Marca
TE ConnectivityTip produs
Straight
Diametru interior
25mm
Diametru interior
8mm
Adhesive Lined
No
Material
Fluid Resistant Elastomer
Number of Breakouts
1
Temperatura minima de lucru
-75°C
Temperatura maxima de lucru
+150°C
Shrunk Diameter Primary
13.8mm
Shrunk Diameter Secondary
3.3mm
Serie
202K2
Detalii produs
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.
€ 304,05
€ 20,27 Each (Supplied in a Bag) (fara TVA)
€ 361,82
€ 24,12 Each (Supplied in a Bag) (cu TVA)
Impachetare pentru productie (Punga)
15
€ 304,05
€ 20,27 Each (Supplied in a Bag) (fara TVA)
€ 361,82
€ 24,12 Each (Supplied in a Bag) (cu TVA)
Impachetare pentru productie (Punga)
15
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
| Cantitate | Pret unitar |
|---|---|
| 15 - 49 | € 20,27 |
| 50+ | € 19,52 |
Documente tehnice
Specificatii
Marca
TE ConnectivityTip produs
Straight
Diametru interior
25mm
Diametru interior
8mm
Adhesive Lined
No
Material
Fluid Resistant Elastomer
Number of Breakouts
1
Temperatura minima de lucru
-75°C
Temperatura maxima de lucru
+150°C
Shrunk Diameter Primary
13.8mm
Shrunk Diameter Secondary
3.3mm
Serie
202K2
Detalii produs
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.