TE Connectivity Straight, Fluid Resistant Elastomer, 17mm
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
TE ConnectivityTip produs
Straight
Diametru interior
17mm
Diametru interior
17mm
Adhesive Lined
No
Material
Fluid Resistant Elastomer
Number of Breakouts
1
Frecventa minima de auto-rezonanta
-75°C
Temperatura maxima de lucru
+150°C
Shrunk Diameter Primary
6.9mm
Shrunk Diameter Secondary
3mm
Serie
202K1
Detalii produs
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.
€ 17,03
€ 17,03 Buc. (fara TVA)
€ 20,61
€ 20,61 Buc. (cu TVA)
1
€ 17,03
€ 17,03 Buc. (fara TVA)
€ 20,61
€ 20,61 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Informatii despre stoc temporar indisponibile
| Cantitate | Pret unitar |
|---|---|
| 1 - 14 | € 17,03 |
| 15 - 49 | € 15,80 |
| 50+ | € 14,32 |
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
TE ConnectivityTip produs
Straight
Diametru interior
17mm
Diametru interior
17mm
Adhesive Lined
No
Material
Fluid Resistant Elastomer
Number of Breakouts
1
Frecventa minima de auto-rezonanta
-75°C
Temperatura maxima de lucru
+150°C
Shrunk Diameter Primary
6.9mm
Shrunk Diameter Secondary
3mm
Serie
202K1
Detalii produs
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.