TE Connectivity, AMP Guide Pin for use with 20 Position High Voltage Connectors
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
TE ConnectivityTip accesoriu
Guide Pin
Product Type
Guide Pin
Utilizare cu
20 Position High Voltage Connectors
Serie
AMP
Culoare
Silver
Material
Stainless Steel
Standards/Approvals
No
Detalii produs
TE Connectivity M Series Guide Pins and Sockets
M Series guide pins and sockets made from stainless steel. These guide pins and sockets are used for aligning connector halves during mating. Centre guide pins and sockets are used in housings that have a single mounting hole as well as in the centre hole of housings that have 3 or 4 mounting holes. Corner guide pins and sockets are for use in corner holes of housings that have 2 to 4 mounting holes but cannot be used in centre mounting holes.
TE Connectivity M Series Connector
Standard connectors are furnished as unloaded housings that have Multimate contact cavities for accepting Type II, Type
III+, and subminiature COAXICON crimp-type contacts, as well as Type III+ solder-type and posted contacts. All Multimate contacts are interchangeable in the same housing cavity.
Informatii despre stoc temporar indisponibile
€ 787,00
€ 7,87 Buc. (Intr-o punga de 100) (fara TVA)
€ 952,27
€ 9,523 Buc. (Intr-o punga de 100) (cu TVA)
100
€ 787,00
€ 7,87 Buc. (Intr-o punga de 100) (fara TVA)
€ 952,27
€ 9,523 Buc. (Intr-o punga de 100) (cu TVA)
Informatii despre stoc temporar indisponibile
100
| Cantitate | Pret unitar | Per Punga |
|---|---|---|
| 100 - 400 | € 7,87 | € 787,00 |
| 500+ | € 7,58 | € 758,00 |
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
TE ConnectivityTip accesoriu
Guide Pin
Product Type
Guide Pin
Utilizare cu
20 Position High Voltage Connectors
Serie
AMP
Culoare
Silver
Material
Stainless Steel
Standards/Approvals
No
Detalii produs
TE Connectivity M Series Guide Pins and Sockets
M Series guide pins and sockets made from stainless steel. These guide pins and sockets are used for aligning connector halves during mating. Centre guide pins and sockets are used in housings that have a single mounting hole as well as in the centre hole of housings that have 3 or 4 mounting holes. Corner guide pins and sockets are for use in corner holes of housings that have 2 to 4 mounting holes but cannot be used in centre mounting holes.
TE Connectivity M Series Connector
Standard connectors are furnished as unloaded housings that have Multimate contact cavities for accepting Type II, Type
III+, and subminiature COAXICON crimp-type contacts, as well as Type III+ solder-type and posted contacts. All Multimate contacts are interchangeable in the same housing cavity.