Tark Thermal Solutions Peltier Module, 33.4W, 3.9A, 15.4V, 30 x 30mm
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Maximum Cooling Capacity
33.4W
Maximum Temperature Difference
+64K
Maximum Current
3.9A
Maximum Voltage
15.4V
Active Area
30 x 30mm
Active Area Length
30mm
Active Area Thickness
3.2mm
Active Area Width
30mm
Detalii produs
Sealed Thermoelectric Coolers
From Laird Technologies, these SealTEC™ thermoelectric coolers provide maximum protection from water condensation when equipment is working at or below the 'dew point' or in humid conditions. The thermoelectric coolers prevent feature a SealTEC™ barrier that prevents water or gases from contacting elements and electrical conductors. The barrier is also effective for foam when used with thermal insulation techniques
Thermoelectric Modules - Peltier Effect
A range of semiconductor thermoelectric devices working on the Peltier effect. When supplied with a suitable electric current, they can either cool or heat. When subject to an externally applied temperature gradient these devices will generate a small amount of electrical power.The larger devices can be used for cooling or controlling the temperature of sub-assemblies. The small size of the mini module makes it ideally suited for cooling miniature electronic components such as infra-red detector chips, microwave IC's, fibre-optic lasers and detectors.,Alternatively, it may be used to minimise the effects of temperature coefficients on oscillator stability, reference voltages, amplifier offsets etc. by providing temperature control.
€ 80,83
€ 80,83 Buc. (fara TVA)
€ 97,80
€ 97,80 Buc. (cu TVA)
1
€ 80,83
€ 80,83 Buc. (fara TVA)
€ 97,80
€ 97,80 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Informatii despre stoc temporar indisponibile
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 80,83 |
| 5 - 9 | € 76,06 |
| 10 - 24 | € 72,94 |
| 25 - 99 | € 69,10 |
| 100+ | € 60,65 |
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Maximum Cooling Capacity
33.4W
Maximum Temperature Difference
+64K
Maximum Current
3.9A
Maximum Voltage
15.4V
Active Area
30 x 30mm
Active Area Length
30mm
Active Area Thickness
3.2mm
Active Area Width
30mm
Detalii produs
Sealed Thermoelectric Coolers
From Laird Technologies, these SealTEC™ thermoelectric coolers provide maximum protection from water condensation when equipment is working at or below the 'dew point' or in humid conditions. The thermoelectric coolers prevent feature a SealTEC™ barrier that prevents water or gases from contacting elements and electrical conductors. The barrier is also effective for foam when used with thermal insulation techniques
Thermoelectric Modules - Peltier Effect
A range of semiconductor thermoelectric devices working on the Peltier effect. When supplied with a suitable electric current, they can either cool or heat. When subject to an externally applied temperature gradient these devices will generate a small amount of electrical power.The larger devices can be used for cooling or controlling the temperature of sub-assemblies. The small size of the mini module makes it ideally suited for cooling miniature electronic components such as infra-red detector chips, microwave IC's, fibre-optic lasers and detectors.,Alternatively, it may be used to minimise the effects of temperature coefficients on oscillator stability, reference voltages, amplifier offsets etc. by providing temperature control.