Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
STMicroelectronicsPower Management Function
Battery Charger, Energy Harvesting
Clasificare
Evaluation Board
Featured Device
SPV1050
Detalii produs
SPV1050 ULP Energy Harvester and Battery Charger Evaluation Board, STMicroelectronics
The STEVAL-ISV019V1 is an Evaluation Board based on the SPV1050, an Ultra Low Power (ULP) energy harvester and battery charger with embedded MPPT and LDO (Low Dropout) Regulators.
The evaluation board is working at the best efficiency implementing the MPPT (Maximum Power Point Tracking) DC-DC converter configuration.
It is optimized to harvest energy from Photovoltaic (PV) panels supplying 0.5V to 2.5V and 30μA to 20mA. You can charge a battery with 3.7V under-voltage protection threshold and 4.2V end of charge voltage threshold. Operating flexibility is possible for a different PV panel and battery with a few easy board changes on the application components.
Battery Charging & Monitoring, STMicroelectronics
Informatii despre stoc temporar indisponibile
€ 41,26
€ 41,26 Buc. (fara TVA)
€ 49,92
€ 49,92 Buc. (cu TVA)
1
€ 41,26
€ 41,26 Buc. (fara TVA)
€ 49,92
€ 49,92 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
STMicroelectronicsPower Management Function
Battery Charger, Energy Harvesting
Clasificare
Evaluation Board
Featured Device
SPV1050
Detalii produs
SPV1050 ULP Energy Harvester and Battery Charger Evaluation Board, STMicroelectronics
The STEVAL-ISV019V1 is an Evaluation Board based on the SPV1050, an Ultra Low Power (ULP) energy harvester and battery charger with embedded MPPT and LDO (Low Dropout) Regulators.
The evaluation board is working at the best efficiency implementing the MPPT (Maximum Power Point Tracking) DC-DC converter configuration.
It is optimized to harvest energy from Photovoltaic (PV) panels supplying 0.5V to 2.5V and 30μA to 20mA. You can charge a battery with 3.7V under-voltage protection threshold and 4.2V end of charge voltage threshold. Operating flexibility is possible for a different PV panel and battery with a few easy board changes on the application components.
