Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
STMicroelectronicsMotor Type
Brushed DC
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
1.4A
Maximum Collector Emitter Voltage
52 V
Timp montare
Surface Mount
Tip pachet
SOIC
Numar pini
20
Maximum Operating Supply Voltage
52 V
Minimum Operating Supply Voltage
8 V
Typical Switching Frequency
100kHz
Dimensiuni
13 x 7.6 x 2.35mm
Latime
7.6mm
Inaltime
2.35mm
Temperatura minima de lucru
-40 °C
Lungime
13mm
Temperatura maxima de lucru
+150 °C
Detalii produs
Motor Control Power Drivers, STMicroelectronics
The range of power drivers by STMicroelectronics are designed to drive a motor or a complex load through the logic commands at its input. They can be used with microcontrollers, DSPs or FPGAs in a motor or motion control system. The power drivers come in Dual Full Bridge, Full Bridge and 3 phase.
Motor Controllers & Drivers, STMicroelectronics
Informatii despre stoc temporar indisponibile
€ 262,80
€ 6,57 Each (In a Tube of 40) (fara TVA)
€ 317,99
€ 7,95 Each (In a Tube of 40) (cu TVA)
40
€ 262,80
€ 6,57 Each (In a Tube of 40) (fara TVA)
€ 317,99
€ 7,95 Each (In a Tube of 40) (cu TVA)
Informatii despre stoc temporar indisponibile
40
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
STMicroelectronicsMotor Type
Brushed DC
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
1.4A
Maximum Collector Emitter Voltage
52 V
Timp montare
Surface Mount
Tip pachet
SOIC
Numar pini
20
Maximum Operating Supply Voltage
52 V
Minimum Operating Supply Voltage
8 V
Typical Switching Frequency
100kHz
Dimensiuni
13 x 7.6 x 2.35mm
Latime
7.6mm
Inaltime
2.35mm
Temperatura minima de lucru
-40 °C
Lungime
13mm
Temperatura maxima de lucru
+150 °C
Detalii produs
Motor Control Power Drivers, STMicroelectronics
The range of power drivers by STMicroelectronics are designed to drive a motor or a complex load through the logic commands at its input. They can be used with microcontrollers, DSPs or FPGAs in a motor or motion control system. The power drivers come in Dual Full Bridge, Full Bridge and 3 phase.


