Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
STMicroelectronicsMotor Type
Brushed DC
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
2.8A
Maximum Collector Emitter Voltage
52 V
Montare
Surface Mount
Tip pachet
PowerSO
Maximum Operating Supply Voltage
52 V
Numar pini
36
Minimum Operating Supply Voltage
8 V
Temperatura minima de lucru
-40 °C
Temperatura maxima de lucru
+150 °C
Lungime
16mm
Inaltime
3.3mm
Latime
11.1mm
Dimensiuni
16 x 11.1 x 3.3mm
Detalii produs
Motor Control Power Drivers, STMicroelectronics
The range of power drivers by STMicroelectronics are designed to drive a motor or a complex load through the logic commands at its input. They can be used with microcontrollers, DSPs or FPGAs in a motor or motion control system. The power drivers come in Dual Full Bridge, Full Bridge and 3 phase.
Motor Controllers & Drivers, STMicroelectronics
€ 38,20
€ 7,64 Each (Supplied in a Tube) (fara TVA)
€ 46,22
€ 9,24 Each (Supplied in a Tube) (cu TVA)
Impachetare pentru productie (Tub)
5
€ 38,20
€ 7,64 Each (Supplied in a Tube) (fara TVA)
€ 46,22
€ 9,24 Each (Supplied in a Tube) (cu TVA)
Informatii despre stoc temporar indisponibile
Impachetare pentru productie (Tub)
5
Informatii despre stoc temporar indisponibile
| Cantitate | Pret unitar |
|---|---|
| 5 - 9 | € 7,64 |
| 10 - 24 | € 6,81 |
| 25 - 49 | € 6,07 |
| 50+ | € 5,70 |
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
STMicroelectronicsMotor Type
Brushed DC
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
2.8A
Maximum Collector Emitter Voltage
52 V
Montare
Surface Mount
Tip pachet
PowerSO
Maximum Operating Supply Voltage
52 V
Numar pini
36
Minimum Operating Supply Voltage
8 V
Temperatura minima de lucru
-40 °C
Temperatura maxima de lucru
+150 °C
Lungime
16mm
Inaltime
3.3mm
Latime
11.1mm
Dimensiuni
16 x 11.1 x 3.3mm
Detalii produs
Motor Control Power Drivers, STMicroelectronics
The range of power drivers by STMicroelectronics are designed to drive a motor or a complex load through the logic commands at its input. They can be used with microcontrollers, DSPs or FPGAs in a motor or motion control system. The power drivers come in Dual Full Bridge, Full Bridge and 3 phase.


