Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
STMicroelectronicsMotor Type
Brushed DC
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
2.8A
Maximum Collector Emitter Voltage
52 V
Timp montare
Surface Mount
Tip pachet
SOIC
Maximum Operating Supply Voltage
52 V
Numar pini
20
Minimum Operating Supply Voltage
8 V
Typical Switching Frequency
100kHz
Temperatura minima de lucru
-40 °C
Inaltime
2.35mm
Dimensiuni
13 x 7.6 x 2.35mm
Temperatura maxima de lucru
+150 °C
Lungime
13mm
Latime
7.6mm
Detalii produs
Motor Control Power Drivers, STMicroelectronics
The range of power drivers by STMicroelectronics are designed to drive a motor or a complex load through the logic commands at its input. They can be used with microcontrollers, DSPs or FPGAs in a motor or motion control system. The power drivers come in Dual Full Bridge, Full Bridge and 3 phase.
Motor Controllers & Drivers, STMicroelectronics
Informatii despre stoc temporar indisponibile
€ 5,92
€ 5,92 Buc. (fara TVA)
€ 7,16
€ 7,16 Buc. (cu TVA)
Standard
1
€ 5,92
€ 5,92 Buc. (fara TVA)
€ 7,16
€ 7,16 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
Standard
1
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 5,92 |
| 5 - 9 | € 5,57 |
| 10 - 24 | € 4,96 |
| 25 - 49 | € 4,42 |
| 50+ | € 4,16 |
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
STMicroelectronicsMotor Type
Brushed DC
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
2.8A
Maximum Collector Emitter Voltage
52 V
Timp montare
Surface Mount
Tip pachet
SOIC
Maximum Operating Supply Voltage
52 V
Numar pini
20
Minimum Operating Supply Voltage
8 V
Typical Switching Frequency
100kHz
Temperatura minima de lucru
-40 °C
Inaltime
2.35mm
Dimensiuni
13 x 7.6 x 2.35mm
Temperatura maxima de lucru
+150 °C
Lungime
13mm
Latime
7.6mm
Detalii produs
Motor Control Power Drivers, STMicroelectronics
The range of power drivers by STMicroelectronics are designed to drive a motor or a complex load through the logic commands at its input. They can be used with microcontrollers, DSPs or FPGAs in a motor or motion control system. The power drivers come in Dual Full Bridge, Full Bridge and 3 phase.


