Starrett Drill Bit for Brick and Masonry, Metal, Ceramic, Plastic, Fibreglass, Suspended Floors, Plaster, Stone, Glass,
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
StarrettProduct Type
Drill Bit
Arbor Included
Yes
Material taiere
Brick and Masonry, Metal, Ceramic, Plastic, Fibreglass, Suspended Floors, Plaster, Stone, Glass, Wood, Porcelain, Stainless Steel, Non-Ferrous, Reinforced Concrete, MDF, Cast Iron, Veneer, Acrylic, Nail Embedded Wood
Cut Depth
51mm
Numar piese
1
Bimetal
Yes
Standards/Approvals
No
Tara de origine
China
Detalii produs
Starrett DB2 Debris Collector
The Starrett DB2 is a debris collector for hole saws. It is designed to prevent debris clean-up and to protect the drill itself. DB2 prevents dust from entering the motor of the drill. It also means that you do not have to wear a mask when drilling. DB2 can be used with hole saws up to 121 mm (4 3/4 inch).
Simply place the shank of the arbor through the hole on the DB2 and attach the arbor to the drill as normal. You can pull the DB2 down to view the work area better. The DB2 debris collector flexes as you drill the hole. Once the hole has been drilled, all the dirt and debris is collected inside the DB2 for you to dispose of nice and easily.
Informatii despre stoc temporar indisponibile
€ 58,20
€ 58,20 Buc. (fara TVA)
€ 70,42
€ 70,42 Buc. (cu TVA)
1
€ 58,20
€ 58,20 Buc. (fara TVA)
€ 70,42
€ 70,42 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
StarrettProduct Type
Drill Bit
Arbor Included
Yes
Material taiere
Brick and Masonry, Metal, Ceramic, Plastic, Fibreglass, Suspended Floors, Plaster, Stone, Glass, Wood, Porcelain, Stainless Steel, Non-Ferrous, Reinforced Concrete, MDF, Cast Iron, Veneer, Acrylic, Nail Embedded Wood
Cut Depth
51mm
Numar piese
1
Bimetal
Yes
Standards/Approvals
No
Tara de origine
China
Detalii produs
Starrett DB2 Debris Collector
The Starrett DB2 is a debris collector for hole saws. It is designed to prevent debris clean-up and to protect the drill itself. DB2 prevents dust from entering the motor of the drill. It also means that you do not have to wear a mask when drilling. DB2 can be used with hole saws up to 121 mm (4 3/4 inch).
Simply place the shank of the arbor through the hole on the DB2 and attach the arbor to the drill as normal. You can pull the DB2 down to view the work area better. The DB2 debris collector flexes as you drill the hole. Once the hole has been drilled, all the dirt and debris is collected inside the DB2 for you to dispose of nice and easily.