Documente tehnice
Specificatii
Tip alimentare
Single
Tensiune alimentare
3 → 5.5 V
Numar canale pe cip
2
Tip iesire
Differential
Maximum Supply Current
5.5 mA
Montare
Through Hole
Tip pachet
DIP
Numar pini
8
Dimensiuni
9.9 x 6.6 x 3.44mm
Inaltime
3.44mm
Lungime
9.9mm
Maximum Operating Supply Voltage
5.5 V
Temperatura minima de lucru
-40 °C
Temperatura maxima de lucru
+125 °C
Latime
6.6mm
Minimum Operating Supply Voltage
3 V
Tara de origine
Thailand
Detalii produs
Si8920 Isolated Amplifier for Current Shunt Measurement
The Si8920 is a galvanically isolated analogue amplifier. Their low voltage and differential input is ideal for measuring voltage across a current shunt resistor or for any place where a sensor must be isolated from the control system.
Output is a differential analogue signal amplified by either 8.1x or 16.2x. The very low signal delay allows control systems to respond quickly to fault conditions or changes in load. Low offset and gain drift ensure that accuracy is maintained over the entire operating temperature range.
High common mode transient immunity means that the Si8920 will deliver accurate measurements even in the presence of high power switching like would be found in a motor drive system or inverter.
To help evaluate the Si8920 there is a dedicated development kit available - SI8920ISO-KIT (RS 9026806). It is populated with the Si8920BC-IP and enables quick connection to a shunt resistor.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 6,88
Buc. (Intr-un pachet de 2) (fara TVA)
€ 8,187
Buc. (Intr-un pachet de 2) (cu TVA)
2
€ 6,88
Buc. (Intr-un pachet de 2) (fara TVA)
€ 8,187
Buc. (Intr-un pachet de 2) (cu TVA)
2
Cumpara in pachete mari
Cantitate | Pret unitar | Per Pachet |
---|---|---|
2 - 8 | € 6,88 | € 13,76 |
10 - 48 | € 6,47 | € 12,94 |
50 - 98 | € 6,27 | € 12,54 |
100 - 248 | € 6,03 | € 12,06 |
250+ | € 5,84 | € 11,68 |
Documente tehnice
Specificatii
Tip alimentare
Single
Tensiune alimentare
3 → 5.5 V
Numar canale pe cip
2
Tip iesire
Differential
Maximum Supply Current
5.5 mA
Montare
Through Hole
Tip pachet
DIP
Numar pini
8
Dimensiuni
9.9 x 6.6 x 3.44mm
Inaltime
3.44mm
Lungime
9.9mm
Maximum Operating Supply Voltage
5.5 V
Temperatura minima de lucru
-40 °C
Temperatura maxima de lucru
+125 °C
Latime
6.6mm
Minimum Operating Supply Voltage
3 V
Tara de origine
Thailand
Detalii produs
Si8920 Isolated Amplifier for Current Shunt Measurement
The Si8920 is a galvanically isolated analogue amplifier. Their low voltage and differential input is ideal for measuring voltage across a current shunt resistor or for any place where a sensor must be isolated from the control system.
Output is a differential analogue signal amplified by either 8.1x or 16.2x. The very low signal delay allows control systems to respond quickly to fault conditions or changes in load. Low offset and gain drift ensure that accuracy is maintained over the entire operating temperature range.
High common mode transient immunity means that the Si8920 will deliver accurate measurements even in the presence of high power switching like would be found in a motor drive system or inverter.
To help evaluate the Si8920 there is a dedicated development kit available - SI8920ISO-KIT (RS 9026806). It is populated with the Si8920BC-IP and enables quick connection to a shunt resistor.