Sick Sensor Actuator Cable

Nr. stoc RS: 701-2971Producator: SickCod de producator: STECKADAPTER KASKADE L=0,71M
brand-logo

Documente tehnice

Specificatii

Marca

Sick

Tip accesoriu

Cordset

Utilizare cu

C2MT Light Curtain, C4MT Light Curtain

Configurare contact

2NC

Configurare contact

2NC

Tara de origine

Germany

Detalii produs

miniTwin Safety Light Curtain - C2MT and C4MT Series

Each miniTwin stick contains both the sender and receiver elements, each symmetrically mounted in one half of a housing and separated by a central synchronisation beam. The diagram shows two identical miniTwin units offset by 180° working as both sender and receiver, in a 3 pair format. Each miniTwin can be used as part of a stand-alone pair, as 2 pair or with the additional purchase of a double plug cascade cable as a cascade (3 pair) format. When cascading in 2 pair or 3 pair there are no blind spots and the miniTwin automatically configures which pair acts as the host and which as the guest. An additional cascade cable is needed for 3 pair configurations, use 701-2962 for miniTwin up to 540mm, or 701-2971 for miniTwin over 600mm, use these to replace the detachable M12 connection plug on the rear of the miniTwin with a 2 x M12 dual plug connector.

Light Curtain

Informatii despre stoc temporar indisponibile.

Incercati din nou mai tarziu

Informatii despre stoc temporar indisponibile.

€ 77,20

Buc. (fara TVA)

€ 91,87

Buc. (cu TVA)

Sick Sensor Actuator Cable

€ 77,20

Buc. (fara TVA)

€ 91,87

Buc. (cu TVA)

Sick Sensor Actuator Cable
Informatii despre stoc temporar indisponibile.

Documente tehnice

Specificatii

Marca

Sick

Tip accesoriu

Cordset

Utilizare cu

C2MT Light Curtain, C4MT Light Curtain

Configurare contact

2NC

Configurare contact

2NC

Tara de origine

Germany

Detalii produs

miniTwin Safety Light Curtain - C2MT and C4MT Series

Each miniTwin stick contains both the sender and receiver elements, each symmetrically mounted in one half of a housing and separated by a central synchronisation beam. The diagram shows two identical miniTwin units offset by 180° working as both sender and receiver, in a 3 pair format. Each miniTwin can be used as part of a stand-alone pair, as 2 pair or with the additional purchase of a double plug cascade cable as a cascade (3 pair) format. When cascading in 2 pair or 3 pair there are no blind spots and the miniTwin automatically configures which pair acts as the host and which as the guest. An additional cascade cable is needed for 3 pair configurations, use 701-2962 for miniTwin up to 540mm, or 701-2971 for miniTwin over 600mm, use these to replace the detachable M12 connection plug on the rear of the miniTwin with a 2 x M12 dual plug connector.

Light Curtain