Documente tehnice
Specificatii
Marca
SensirionMedia Monitored
Liquid
Tip dispozitiv
Liquid Flow Switch
Minimum Flow Rate
250 (Isopropyl Alcohol)
Debit maxim
250 (Isopropyl Alcohol) mL/min, 50 (Water) mL/min
Tensiunea de alimentare
5 → 12 V
Dimensiune conducta
9.2 mm
Conexiune
5 Pin PCB Header
Presiune maxima
3bar
Material
Borosilicate Glass (Tube Material), FEP (Sealing), PEEk (Fitting)
Temperatura minima de lucru
+10°C
Temperatura maxima de lucru
+50°C
Curent nominal
6.8 mA
Tara de origine
Switzerland
Detalii produs
LG01-2000A Liquid Flow Switch & Bubble Detectors
The LG01-2000A family of liquid flow switches from Sensirion are able to detect liquid flow by millilitres per minute (ml/min). It also provides bubble detection.
When the flow rate is more than the desired flow switch point, the output signal is 5 V. If the flow rate is lower than this point the output signal is 0 V. This is also the case for when air/bubbles are sensed within the sensors flow channel.
This non-invasive liquid flow switch has a straight glass capillary flow path. This also enables chemical resistance and bio-compatibility.
An additional Connectivity Kit can be purchased separately for the LG01 liquid flow switches.
Sensirion Liquid Flow Switches
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
P.O.A.
25
P.O.A.
25
Documente tehnice
Specificatii
Marca
SensirionMedia Monitored
Liquid
Tip dispozitiv
Liquid Flow Switch
Minimum Flow Rate
250 (Isopropyl Alcohol)
Debit maxim
250 (Isopropyl Alcohol) mL/min, 50 (Water) mL/min
Tensiunea de alimentare
5 → 12 V
Dimensiune conducta
9.2 mm
Conexiune
5 Pin PCB Header
Presiune maxima
3bar
Material
Borosilicate Glass (Tube Material), FEP (Sealing), PEEk (Fitting)
Temperatura minima de lucru
+10°C
Temperatura maxima de lucru
+50°C
Curent nominal
6.8 mA
Tara de origine
Switzerland
Detalii produs
LG01-2000A Liquid Flow Switch & Bubble Detectors
The LG01-2000A family of liquid flow switches from Sensirion are able to detect liquid flow by millilitres per minute (ml/min). It also provides bubble detection.
When the flow rate is more than the desired flow switch point, the output signal is 5 V. If the flow rate is lower than this point the output signal is 0 V. This is also the case for when air/bubbles are sensed within the sensors flow channel.
This non-invasive liquid flow switch has a straight glass capillary flow path. This also enables chemical resistance and bio-compatibility.
An additional Connectivity Kit can be purchased separately for the LG01 liquid flow switches.