Documente tehnice
Specificatii
Marca
Sensata / CrydomMaximum Load Current
7.6 Arms
Timp montare
DIN Rail
Maximum Load Voltage
510 Vrms
Minimum Load Voltage
48 Vrms
Maximum Control Voltage
30 V dc
Minimum Control Voltage
18 V dc
Switching Type
DC
Control Voltage Range
18 → 30 V dc
Minimum Load Current
0.15 A rms
Numar poli
3
Configurare contact
DPST
Tip terminal
Screw
Relay Type
Solid State Relay
Maximum Turn On Time
100 ms
Load Voltage Range
48 → 510Vrms
Dimensiune celula
DRC
Dimensiuni
45.3 x 95.6 x 86.7mm
Temperatura de lucru
-20 → +60°C
Adancime
95.6mm
PRICED TO CLEAR
Yes
Caracteristici speciale
7.6 Amp AC Semiconductor Motor Controller, LED Input Status Indicator, Load Voltage Range Upto 600 V ac
Standarde
CE, CSA C22.2 No. 14, CULus, IEC, IEC 61000-6-2, UL 508
Frecventa minima de auto-rezonanta
-20°C
Inaltime
86.7mm
Capacitate
20pF
Temperatura maxima de lucru
+60°C
Off State Leakage Current
5.5 mArms
Lungime
45.3mm
Tara de origine
Mexico
Detalii produs
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.
Solid State Contactors
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
P.O.A.
1
P.O.A.
1
Documente tehnice
Specificatii
Marca
Sensata / CrydomMaximum Load Current
7.6 Arms
Timp montare
DIN Rail
Maximum Load Voltage
510 Vrms
Minimum Load Voltage
48 Vrms
Maximum Control Voltage
30 V dc
Minimum Control Voltage
18 V dc
Switching Type
DC
Control Voltage Range
18 → 30 V dc
Minimum Load Current
0.15 A rms
Numar poli
3
Configurare contact
DPST
Tip terminal
Screw
Relay Type
Solid State Relay
Maximum Turn On Time
100 ms
Load Voltage Range
48 → 510Vrms
Dimensiune celula
DRC
Dimensiuni
45.3 x 95.6 x 86.7mm
Temperatura de lucru
-20 → +60°C
Adancime
95.6mm
PRICED TO CLEAR
Yes
Caracteristici speciale
7.6 Amp AC Semiconductor Motor Controller, LED Input Status Indicator, Load Voltage Range Upto 600 V ac
Standarde
CE, CSA C22.2 No. 14, CULus, IEC, IEC 61000-6-2, UL 508
Frecventa minima de auto-rezonanta
-20°C
Inaltime
86.7mm
Capacitate
20pF
Temperatura maxima de lucru
+60°C
Off State Leakage Current
5.5 mArms
Lungime
45.3mm
Tara de origine
Mexico
Detalii produs
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.