Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
Sensata / CrydomNumar poli
3
Serie
DRC
Tip terminal
Screw
Lungime
45.3mm
Adancime
95.6mm
Montare
DIN Rail
Load Voltage
48 V ac → 400V ac
Frecventa minima de auto-rezonanta
-30°C
Curent de intrare
12.5 mA → 32mA
Load Current
7.6A
Control Voltage
18 V ac → 30 V ac, 18 V dc → 30 V dc
Temperatura maxima de lucru
+80°C
Tara de origine
Mexico
Detalii produs
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.
Solid State Contactors
€ 196,65
€ 196,65 Buc. (fara TVA)
€ 237,95
€ 237,95 Buc. (cu TVA)
1
€ 196,65
€ 196,65 Buc. (fara TVA)
€ 237,95
€ 237,95 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Informatii despre stoc temporar indisponibile
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 196,65 |
| 5 - 9 | € 185,06 |
| 10 - 24 | € 173,62 |
| 25 - 49 | € 162,39 |
| 50+ | € 151,34 |
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
Sensata / CrydomNumar poli
3
Serie
DRC
Tip terminal
Screw
Lungime
45.3mm
Adancime
95.6mm
Montare
DIN Rail
Load Voltage
48 V ac → 400V ac
Frecventa minima de auto-rezonanta
-30°C
Curent de intrare
12.5 mA → 32mA
Load Current
7.6A
Control Voltage
18 V ac → 30 V ac, 18 V dc → 30 V dc
Temperatura maxima de lucru
+80°C
Tara de origine
Mexico
Detalii produs
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.
