Schneider Electric Terminal Block for Use with Modicon M340

Nr. stoc RS: 681-8703Producator: Schneider ElectricCod de producator: BMXFTB2820Nr. articol Distrelec: 30304715
brand-logo
Vezi toate produsele din Accesorii PLC

Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)

Specificatii

Marca

Schneider Electric

Tip accesoriu

Terminal Block

Utilizare cu

Modicon M340

Detalii produs

M340 Pulse Train Output - Motion Module

This module provides a square wave pulse train output to drive either a stepper or servo system for a specified number of pulses and a specified cycle time. It can be programmed to produce either one train of pulses or a pulse profile consisting of multiple trains of pulses.,For example, a pulse profile can be used to control a stepper motor or servo-motor through a simple ramp up, run, and ramp down sequence or more complicated sequences.,The control positioning is achieved according to an open loop mode meaning without the need of feedback information on the real position of the mobile.

€ 41,83

€ 41,83 Buc. (fara TVA)

€ 50,61

€ 50,61 Buc. (cu TVA)

Schneider Electric Terminal Block for Use with Modicon M340

1

Disponibil in multiplu de 1
1€ 41,83
2€ 83,66
3€ 125,49
4€ 167,32
5€ 209,15
6€ 250,98
7€ 292,81
8€ 334,64
9€ 376,47
10€ 418,30
11€ 460,13
12€ 501,96
13€ 543,79
14€ 585,62
15€ 627,45

€ 41,83

€ 41,83 Buc. (fara TVA)

€ 50,61

€ 50,61 Buc. (cu TVA)

Schneider Electric Terminal Block for Use with Modicon M340

Informatii despre stoc temporar indisponibile

1

Disponibil in multiplu de 1
1€ 41,83
2€ 83,66
3€ 125,49
4€ 167,32
5€ 209,15
6€ 250,98
7€ 292,81
8€ 334,64
9€ 376,47
10€ 418,30
11€ 460,13
12€ 501,96
13€ 543,79
14€ 585,62
15€ 627,45

Informatii despre stoc temporar indisponibile

Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)

Specificatii

Marca

Schneider Electric

Tip accesoriu

Terminal Block

Utilizare cu

Modicon M340

Detalii produs

M340 Pulse Train Output - Motion Module

This module provides a square wave pulse train output to drive either a stepper or servo system for a specified number of pulses and a specified cycle time. It can be programmed to produce either one train of pulses or a pulse profile consisting of multiple trains of pulses.,For example, a pulse profile can be used to control a stepper motor or servo-motor through a simple ramp up, run, and ramp down sequence or more complicated sequences.,The control positioning is achieved according to an open loop mode meaning without the need of feedback information on the real position of the mobile.