Schaffner 4A, 250 V ac Male Panel Mount IEC Inlet Filter FN9260-4-06, Faston 2 Fuse
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
SchaffnerSubtip
Male
Number of Fuses
2
Dimensiune siguranta
5 x 20mm
Tip comutator
None
Terminal
Faston
Curent nominal
4A
Tensiune
250 V ac
Montare
Panel Mount
Operating Frequency
0 → 400Hz
IEC Connector Type
C14
Latime
35mm
Adancime
60.3mm
Inaltime
46mm
Detalii produs
Double Fused FN9260
The FN9260 power entry module combines an IEC inlet, mains filter with excellent filter attenuation and fuses in a small form factor. A wide selection on amperage ratings, output connections, mounting possibilities and filters for medical applications are designed to offer you the desired solution.
Can be used in a wide range of applications such as portable electrical & electronic equipment, medical equipment, household equipment, single-phase power supplies, switch-mode power supplies and test & measurement equipment.
Warning
Neutral line must not be fused where it is referenced to earth.
Approvals
UL recognised component, CSA certified, VDE
Schaffner Type FN Fused/Fused and Switched
IEC Inlet plugs with integral mains filter. Designed to filter mains borne interference where capacitors alone may prove inadequate. Connection by 250 ( 1/4 in) receptacles. (For insulating boots see typically RS stock no. 526-0724). Accept 20 x 5mm dia. fuses. Fuses not included.
€ 739,80
€ 12,33 Buc. (Intr-o cutie de 60) (fara TVA)
€ 895,16
€ 14,919 Buc. (Intr-o cutie de 60) (cu TVA)
60
€ 739,80
€ 12,33 Buc. (Intr-o cutie de 60) (fara TVA)
€ 895,16
€ 14,919 Buc. (Intr-o cutie de 60) (cu TVA)
Informatii despre stoc temporar indisponibile
60
Informatii despre stoc temporar indisponibile
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
SchaffnerSubtip
Male
Number of Fuses
2
Dimensiune siguranta
5 x 20mm
Tip comutator
None
Terminal
Faston
Curent nominal
4A
Tensiune
250 V ac
Montare
Panel Mount
Operating Frequency
0 → 400Hz
IEC Connector Type
C14
Latime
35mm
Adancime
60.3mm
Inaltime
46mm
Detalii produs
Double Fused FN9260
The FN9260 power entry module combines an IEC inlet, mains filter with excellent filter attenuation and fuses in a small form factor. A wide selection on amperage ratings, output connections, mounting possibilities and filters for medical applications are designed to offer you the desired solution.
Can be used in a wide range of applications such as portable electrical & electronic equipment, medical equipment, household equipment, single-phase power supplies, switch-mode power supplies and test & measurement equipment.
Warning
Neutral line must not be fused where it is referenced to earth.
Approvals
UL recognised component, CSA certified, VDE
Schaffner Type FN Fused/Fused and Switched
IEC Inlet plugs with integral mains filter. Designed to filter mains borne interference where capacitors alone may prove inadequate. Connection by 250 ( 1/4 in) receptacles. (For insulating boots see typically RS stock no. 526-0724). Accept 20 x 5mm dia. fuses. Fuses not included.