RS PRO Thermal Interface Sheet, 0.2mm Thick, 2.5W/m·K, 150 x 150mm
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProDimensiuni
150 x 150mm
Grosime
0.2mm
Lungime
150mm
Latime
150mm
Thermal Conductivity
2.5W/m·K
Self-Adhesive
No
Temperatura minima de lucru
-45°C
Temperatura maxima de lucru
+125°C
Culoare
Grey
Temperatura de lucru
-45 → +125 °C
Tara de origine
Taiwan, Province Of China
Detalii produs
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.
€ 33,15
€ 33,15 Buc. (fara TVA)
€ 40,11
€ 40,11 Buc. (cu TVA)
1
€ 33,15
€ 33,15 Buc. (fara TVA)
€ 40,11
€ 40,11 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Informatii despre stoc temporar indisponibile
| Cantitate | Pret unitar |
|---|---|
| 1 - 9 | € 33,15 |
| 10 - 24 | € 30,20 |
| 25 - 49 | € 28,61 |
| 50+ | € 27,37 |
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProDimensiuni
150 x 150mm
Grosime
0.2mm
Lungime
150mm
Latime
150mm
Thermal Conductivity
2.5W/m·K
Self-Adhesive
No
Temperatura minima de lucru
-45°C
Temperatura maxima de lucru
+125°C
Culoare
Grey
Temperatura de lucru
-45 → +125 °C
Tara de origine
Taiwan, Province Of China
Detalii produs
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.