RS PRO Test Pin 1.5A
Documente tehnice
Specificatii
Marca
RS ProCurent nominal
1.5A
Probe Socket Diameter
16.35mm
Distrelec Product Id
30403169
Tara de origine
China
Detalii produs
RS Pro Spring Probe with Needle Point Head
Brought to you under the trusted RS Pro Brand, this flat head spring spade terminal probe is designed to be used with an appropriate receptacle, which is ordered separately. Having the probe separate from the receptacle allows easy replacement of damaged spring test probes without disturbing the wiring.
The probe is suited ideally (in development and production) for automatic test equipment (ATE) and test jigs, where fast testing of multipoint PCBs and sub-assemblies is required. Receptacles can be push fitted into the mounting plate to provide an airtight seal without the use of adhesives.
The needle head is ideal for test lands, pads, leads and holes. Penetrates oxides and fluxes as well as contaminated boards.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 4,29
Buc. (Intr-un pachet de 5) (fara TVA)
€ 5,105
Buc. (Intr-un pachet de 5) (cu TVA)
5
€ 4,29
Buc. (Intr-un pachet de 5) (fara TVA)
€ 5,105
Buc. (Intr-un pachet de 5) (cu TVA)
5
Cumpara in pachete mari
| Cantitate | Pret unitar | Per Pachet |
|---|---|---|
| 5 - 20 | € 4,29 | € 21,45 |
| 25 - 45 | € 3,82 | € 19,10 |
| 50 - 95 | € 3,48 | € 17,40 |
| 100+ | € 3,14 | € 15,70 |
Documente tehnice
Specificatii
Marca
RS ProCurent nominal
1.5A
Probe Socket Diameter
16.35mm
Distrelec Product Id
30403169
Tara de origine
China
Detalii produs
RS Pro Spring Probe with Needle Point Head
Brought to you under the trusted RS Pro Brand, this flat head spring spade terminal probe is designed to be used with an appropriate receptacle, which is ordered separately. Having the probe separate from the receptacle allows easy replacement of damaged spring test probes without disturbing the wiring.
The probe is suited ideally (in development and production) for automatic test equipment (ATE) and test jigs, where fast testing of multipoint PCBs and sub-assemblies is required. Receptacles can be push fitted into the mounting plate to provide an airtight seal without the use of adhesives.
The needle head is ideal for test lands, pads, leads and holes. Penetrates oxides and fluxes as well as contaminated boards.