Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProProduct Type
Hydraulic Check Valve
Cracking Pressure
0.35bar
Conexiune
BSP
Tip material
Steel
Debit maxim
15L/min
Material de etansare
Thermoplastic
Mount Pattern
CETOP
Single/Double
Single
Presiune maxima de operare
350 bar
Temperatura maxima de lucru
100°C
Temperatura minima de lucru
-20°C
Montare
In Line Mount
Inaltime
74mm
Lungime
74mm
Standards/Approvals
No
Latime
9.5mm
Dimensiune filet
1/4 in
Tara de origine
Italy
Detalii Produs
Need a reliable check valve for your hydraulic system? This RS PRO inline mounting valve is easy to install, connecting directly to your pipeline. It's made from a strong stainless steel material with a corrosion-resistant Nylon guide for increased durability.
The ball mechanism is spring-loaded for positive action, so it can be fitted vertically or horizontally, giving you greater flexibility. This valve has a standard CETOP (Comité Européenne des Transmissions Oléohydrauliques et Pneumatiques) mounting pattern, so it can be used in a wide variety of hydraulic, pneumatic and mechanical applications.
The soft-seated thermoplastic ball material creates a tight seal, so it can be used with gas. For systems that use water, try an alternative component, such as a zinc-passivated carbon steel valve instead.
Informatii despre stoc temporar indisponibile
€ 18,59
€ 18,59 Buc. (fara TVA)
€ 22,49
€ 22,49 Buc. (cu TVA)
1
€ 18,59
€ 18,59 Buc. (fara TVA)
€ 22,49
€ 22,49 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProProduct Type
Hydraulic Check Valve
Cracking Pressure
0.35bar
Conexiune
BSP
Tip material
Steel
Debit maxim
15L/min
Material de etansare
Thermoplastic
Mount Pattern
CETOP
Single/Double
Single
Presiune maxima de operare
350 bar
Temperatura maxima de lucru
100°C
Temperatura minima de lucru
-20°C
Montare
In Line Mount
Inaltime
74mm
Lungime
74mm
Standards/Approvals
No
Latime
9.5mm
Dimensiune filet
1/4 in
Tara de origine
Italy
Detalii Produs
Need a reliable check valve for your hydraulic system? This RS PRO inline mounting valve is easy to install, connecting directly to your pipeline. It's made from a strong stainless steel material with a corrosion-resistant Nylon guide for increased durability.
The ball mechanism is spring-loaded for positive action, so it can be fitted vertically or horizontally, giving you greater flexibility. This valve has a standard CETOP (Comité Européenne des Transmissions Oléohydrauliques et Pneumatiques) mounting pattern, so it can be used in a wide variety of hydraulic, pneumatic and mechanical applications.
The soft-seated thermoplastic ball material creates a tight seal, so it can be used with gas. For systems that use water, try an alternative component, such as a zinc-passivated carbon steel valve instead.
