RS PRO Solder Tag Board with 40 Contacts for Raspberry Pi
Documente tehnice
Specificatii
Marca
RS ProNume produs
Solder Tag Board with 40 Contacts for Raspberry Pi
Categoria de accesorii
Prototyping
Form Factor
Addon
Tara de origine
United Kingdom
Detalii produs
Solder Tag Board for Raspberry Pi
This solder tag board is designed to work with the Raspberry Pi. The terminals on the board match the pins on the Pi. With a total of 40 terminals it provides a simple means of soldering and de-soldering electronic components to the GPIO header when developing prototypes.
Ideal for electronics engineers developing prototypes and also helpful for electronics students and apprentices.
The holes in the tag board align with the mounting holes in the Pi allowing the tag board to be mounted beneath the Pi using an additional mounting kit consisting of 4 legs and 8 x 2mm Pozidriv screws. For the 4 leg mounting kit, please see RS 124-3364.
A central slot in the tag board allows a ribbon cable, connected to the Pi GPIO socket, to pass through. For a suitable ribbon with connector, please see RS 124-2929.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 5,44
Buc. (fara TVA)
€ 6,47
Buc. (cu TVA)
1
€ 5,44
Buc. (fara TVA)
€ 6,47
Buc. (cu TVA)
1
Cumpara in pachete mari
| Cantitate | Pret unitar |
|---|---|
| 1 - 9 | € 5,44 |
| 10 - 99 | € 4,79 |
| 100+ | € 4,40 |
Documente tehnice
Specificatii
Marca
RS ProNume produs
Solder Tag Board with 40 Contacts for Raspberry Pi
Categoria de accesorii
Prototyping
Form Factor
Addon
Tara de origine
United Kingdom
Detalii produs
Solder Tag Board for Raspberry Pi
This solder tag board is designed to work with the Raspberry Pi. The terminals on the board match the pins on the Pi. With a total of 40 terminals it provides a simple means of soldering and de-soldering electronic components to the GPIO header when developing prototypes.
Ideal for electronics engineers developing prototypes and also helpful for electronics students and apprentices.
The holes in the tag board align with the mounting holes in the Pi allowing the tag board to be mounted beneath the Pi using an additional mounting kit consisting of 4 legs and 8 x 2mm Pozidriv screws. For the 4 leg mounting kit, please see RS 124-3364.
A central slot in the tag board allows a ribbon cable, connected to the Pi GPIO socket, to pass through. For a suitable ribbon with connector, please see RS 124-2929.