Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProProduct Type
Float Switch
Montare
Vertical, External
Switch Output
NO/NC
Housing Material
Polypropylene
Lungime cablu
1m
Temperatura minima de lucru
-20°C
Temperatura maxima de lucru
100°C
Maximum AC Voltage
240V ac
Maximum DC Voltage
120V dc
Maximum Current
600mA
Gasket Material
Nitrile Rubber (NBR)
Standards/Approvals
No
Hazardous Area Certification
No
Series
RSF100
Tara de origine
China
Detalii Produs
The RS PRO external vertical mounting float switch is made up of polypropylene and gasket material of nitrile It has an output of NO/NC with a maximum switching voltage of 240VAC and switching current of 0.6A. The switch action may be reversed by removing the float, inverting it, then refitting to the stem. This float switch has 25VA switching capacity. Mounting is in the top or bottom of a tank through a compression seal, so does not require access to the inside of the tank for fitting a compact vertically mounted design with a single switch point.
Informatii despre stoc temporar indisponibile
€ 24,34
€ 24,34 Buc. (fara TVA)
€ 29,45
€ 29,45 Buc. (cu TVA)
1
€ 24,34
€ 24,34 Buc. (fara TVA)
€ 29,45
€ 29,45 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProProduct Type
Float Switch
Montare
Vertical, External
Switch Output
NO/NC
Housing Material
Polypropylene
Lungime cablu
1m
Temperatura minima de lucru
-20°C
Temperatura maxima de lucru
100°C
Maximum AC Voltage
240V ac
Maximum DC Voltage
120V dc
Maximum Current
600mA
Gasket Material
Nitrile Rubber (NBR)
Standards/Approvals
No
Hazardous Area Certification
No
Series
RSF100
Tara de origine
China
Detalii Produs
The RS PRO external vertical mounting float switch is made up of polypropylene and gasket material of nitrile It has an output of NO/NC with a maximum switching voltage of 240VAC and switching current of 0.6A. The switch action may be reversed by removing the float, inverting it, then refitting to the stem. This float switch has 25VA switching capacity. Mounting is in the top or bottom of a tank through a compression seal, so does not require access to the inside of the tank for fitting a compact vertically mounted design with a single switch point.
