RS PRO Non-Contact Voltage Indicator, 230 V ac to 1000 V ac
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProProduct Type
Non-Contact Voltage Indicator
Indicator Type
Voltage
Battery Type
AAA
Standards/Approvals
No
Power Source
Battery
Temperatura minima de lucru
-20°C
Temperatura maxima de lucru
40°C
Maximum Detection Voltage
1000V ac
Lungime
151mm
Diametru
18 mm
Greutate
50g
Hazardous Area Certification
ATEX, IECEx
Minimum Detection Voltage
230V ac
Safety Category Level
CAT III
Safety Category Voltage
1000V ac
Tara de origine
Denmark
Detalii produs
RS Pro Volt Stick Non-Contact Voltage Detector
The Non-Contact VoltStick® is a tester for safely checking the presence of an AC voltage without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes etc. No current flow is needed for correct detection. Apply the plastic tip to any connection point or move it along an insulated cable. When an AC voltage is detected a red indicator in the plastic tip illuminates, as it detects the live wire through the insulation. Note that if a 3 phase machine is connected up and one of the fuses blows, the voltage is conducted back to the defective fuse the other way and a faulty indication may be given. Make sure that all machines are disconnected before testing. The VoltStick® cannot be used on socket with shielded cable.
Informatii despre stoc temporar indisponibile
€ 79,73
€ 79,73 Buc. (fara TVA)
€ 96,47
€ 96,47 Buc. (cu TVA)
Tip calibrare
Fara calibrare
1
€ 79,73
€ 79,73 Buc. (fara TVA)
€ 96,47
€ 96,47 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
Tip calibrare
Fara calibrare
1
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProProduct Type
Non-Contact Voltage Indicator
Indicator Type
Voltage
Battery Type
AAA
Standards/Approvals
No
Power Source
Battery
Temperatura minima de lucru
-20°C
Temperatura maxima de lucru
40°C
Maximum Detection Voltage
1000V ac
Lungime
151mm
Diametru
18 mm
Greutate
50g
Hazardous Area Certification
ATEX, IECEx
Minimum Detection Voltage
230V ac
Safety Category Level
CAT III
Safety Category Voltage
1000V ac
Tara de origine
Denmark
Detalii produs
RS Pro Volt Stick Non-Contact Voltage Detector
The Non-Contact VoltStick® is a tester for safely checking the presence of an AC voltage without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes etc. No current flow is needed for correct detection. Apply the plastic tip to any connection point or move it along an insulated cable. When an AC voltage is detected a red indicator in the plastic tip illuminates, as it detects the live wire through the insulation. Note that if a 3 phase machine is connected up and one of the fuses blows, the voltage is conducted back to the defective fuse the other way and a faulty indication may be given. Make sure that all machines are disconnected before testing. The VoltStick® cannot be used on socket with shielded cable.