RS PRO Light Transformer, 230 to 240 V, 12 V

Nr. stoc RS: 714-1381Producator: RS PRO
brand-logo

Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)

Specificatii

Marca

RS Pro

Product Type

Light Transformer

Primary Voltage

230 to 240 V

Secondary Voltage

12 V

Minimum Load Requirement

30W

Temperatura maxima de lucru

70°C

Temperatura minima de lucru

40°C

Sub Type

Dimmable Electronic Transformer

Terminal

Screw

Montare

Screw

Latime

49 mm

Adancime

39mm

Lungime

190mm

Greutate

205g

Standards/Approvals

EN 61347-2-2, VDE 0710-T14, EN 61347-1, EN 61547, EN 55015, EN 60598-1, EN 61000-3-2

Serie

WOLF 150 - WX 150

Dimming Method

Trailing Edge

Maximum Operating Frequency

60Hz

Minimum Operating Frequency

50Hz

Tara de origine

Italy

Detalii produs

Low Voltage Lighting Transformers

Dimming Methods (where applicable):
Leading Edge:
The control device is either a thyristor or triac which blocks power until they are switched on by the control signal. At that point the current flows almost instantaneously and continues to flow until the end of the half cycle of the mains waveform. When the signal reaches zero, the device turns off and no more current is passed until it is triggered again. Turning the power on and off in this manner averages out creating a constant intensity level and by altering the precise trigger point over a period of time the lamp can be dimmed.

Trailing Edge:
Since this method of dimming uses transistor technology it is not limited to just switching, therefore current can be controlled gradually. Transistors can be programmed to pass current at the start of each half cycle, and gradually switch off later. This will control the full amount of power reaching the lamp without the side effects of a step increase in current.

S-ar putea să te intereseze

Informatii despre stoc temporar indisponibile

€ 32,43

€ 32,43 Buc. (fara TVA)

€ 39,24

€ 39,24 Buc. (cu TVA)

RS PRO Light Transformer, 230 to 240 V, 12 V

€ 32,43

€ 32,43 Buc. (fara TVA)

€ 39,24

€ 39,24 Buc. (cu TVA)

RS PRO Light Transformer, 230 to 240 V, 12 V

Informatii despre stoc temporar indisponibile

S-ar putea să te intereseze

Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)

Specificatii

Marca

RS Pro

Product Type

Light Transformer

Primary Voltage

230 to 240 V

Secondary Voltage

12 V

Minimum Load Requirement

30W

Temperatura maxima de lucru

70°C

Temperatura minima de lucru

40°C

Sub Type

Dimmable Electronic Transformer

Terminal

Screw

Montare

Screw

Latime

49 mm

Adancime

39mm

Lungime

190mm

Greutate

205g

Standards/Approvals

EN 61347-2-2, VDE 0710-T14, EN 61347-1, EN 61547, EN 55015, EN 60598-1, EN 61000-3-2

Serie

WOLF 150 - WX 150

Dimming Method

Trailing Edge

Maximum Operating Frequency

60Hz

Minimum Operating Frequency

50Hz

Tara de origine

Italy

Detalii produs

Low Voltage Lighting Transformers

Dimming Methods (where applicable):
Leading Edge:
The control device is either a thyristor or triac which blocks power until they are switched on by the control signal. At that point the current flows almost instantaneously and continues to flow until the end of the half cycle of the mains waveform. When the signal reaches zero, the device turns off and no more current is passed until it is triggered again. Turning the power on and off in this manner averages out creating a constant intensity level and by altering the precise trigger point over a period of time the lamp can be dimmed.

Trailing Edge:
Since this method of dimming uses transistor technology it is not limited to just switching, therefore current can be controlled gradually. Transistors can be programmed to pass current at the start of each half cycle, and gradually switch off later. This will control the full amount of power reaching the lamp without the side effects of a step increase in current.

S-ar putea să te intereseze