RS PRO Heating Element, 42 mm, 32 mm, Band Heater, 200 W, 230V ac
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProProduct Type
Heating Element
Element Type
Band Heater
Putere
200W
Lungime totala
42mm
Latime totala
32mm
Standards/Approvals
RoHS
Tensiunea de alimentare
230V ac
Tara de origine
China
Detalii produs
Sealed Mica Nozzle Heaters
These nozzle heaters are hermetically sealed for liquid plastic within the manufacturing process. These types of heaters are used to give long life where normal mica heaters cannot last as long due to process leakages.
These heaters are typically used on injection moulding machines, extruders, dies, moulds and process machinery.
Multi-Purpose Process Heaters
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.
Warning
These heaters shall only be used where adequate electrical, thermal and mechanical barriers are provided to prevent access to hazardous parts without the use of a tool.
Informatii despre stoc temporar indisponibile
€ 70,46
€ 70,46 Buc. (fara TVA)
€ 85,26
€ 85,26 Buc. (cu TVA)
1
€ 70,46
€ 70,46 Buc. (fara TVA)
€ 85,26
€ 85,26 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 70,46 |
| 5 - 9 | € 66,98 |
| 10+ | € 64,91 |
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProProduct Type
Heating Element
Element Type
Band Heater
Putere
200W
Lungime totala
42mm
Latime totala
32mm
Standards/Approvals
RoHS
Tensiunea de alimentare
230V ac
Tara de origine
China
Detalii produs
Sealed Mica Nozzle Heaters
These nozzle heaters are hermetically sealed for liquid plastic within the manufacturing process. These types of heaters are used to give long life where normal mica heaters cannot last as long due to process leakages.
These heaters are typically used on injection moulding machines, extruders, dies, moulds and process machinery.
Multi-Purpose Process Heaters
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.
Warning
These heaters shall only be used where adequate electrical, thermal and mechanical barriers are provided to prevent access to hazardous parts without the use of a tool.