RS PRO E10 Indicator Light, Clear, 24 V, 120 mA, 3000h
Documente tehnice
Specificatii
Marca
RS ProTensiune nominala
24 V
Baza lampa
E10
Curent nominal
120 mA
Diametru
10mm
Lamp Size
T3 1/4
Lungime
28 mm
Culoare lentila
Clear
Luminozitate
12 lm
Durata de viata
3000h
Tara de origine
Korea, Republic Of
Detalii produs
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 1,18
Buc. (Intr-un pachet de 10) (fara TVA)
€ 1,404
Buc. (Intr-un pachet de 10) (cu TVA)
10
€ 1,18
Buc. (Intr-un pachet de 10) (fara TVA)
€ 1,404
Buc. (Intr-un pachet de 10) (cu TVA)
10
Cumpara in pachete mari
| Cantitate | Pret unitar | Per Pachet |
|---|---|---|
| 10 - 90 | € 1,18 | € 11,80 |
| 100 - 490 | € 1,02 | € 10,20 |
| 500 - 990 | € 0,84 | € 8,40 |
| 1000+ | € 0,78 | € 7,80 |
Documente tehnice
Specificatii
Marca
RS ProTensiune nominala
24 V
Baza lampa
E10
Curent nominal
120 mA
Diametru
10mm
Lamp Size
T3 1/4
Lungime
28 mm
Culoare lentila
Clear
Luminozitate
12 lm
Durata de viata
3000h
Tara de origine
Korea, Republic Of
Detalii produs
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.