RS PRO Blue Polyethylene Solder Sleeve 35.5mm Length 11.5 mm Cable Diameter 5.8 mm Cable Diameter
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProProduct Type
Solder Sleeve
Sub Type
Low Temperature Solder Sleeve
Sleeve Length
35.5mm
Material
Polyethylene
Dielectric
1kV
Tensiune
300 V
Minimum Cable Diameter
5.8mm
Maximum Cable Diameter
11.5mm
Culoare
Blue
Temperatura minima de lucru
-55°C
Temperatura maxima de lucru
125°C
Standards/Approvals
RoHS Compliant
Shrink Temperature
115°C
Serie
GAST
Tara de origine
China
Detalii produs
RS Solder Sleeves
Heat-Shrinkable sleeves that provide strain relief, insulation, moisture resistance and protection for terminations from environmental damage. The transparent heat-shrinkable sleeve contains a pre-measured fluxed solder band and coloured hot-melt glue at each end. A labour-saving alternative to conventional wire and cable termination methods such as hand soldering or crimping. The solder sleeves are available in a range of sizes to suit cable diameters from 0.5 mm² to 22 mm², or as an assorted kit.
Informatii despre stoc temporar indisponibile
€ 36,97
€ 36,97 1 Bag of 25 (fara TVA)
€ 44,73
€ 44,73 1 Bag of 25 (cu TVA)
1
€ 36,97
€ 36,97 1 Bag of 25 (fara TVA)
€ 44,73
€ 44,73 1 Bag of 25 (cu TVA)
Informatii despre stoc temporar indisponibile
1
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProProduct Type
Solder Sleeve
Sub Type
Low Temperature Solder Sleeve
Sleeve Length
35.5mm
Material
Polyethylene
Dielectric
1kV
Tensiune
300 V
Minimum Cable Diameter
5.8mm
Maximum Cable Diameter
11.5mm
Culoare
Blue
Temperatura minima de lucru
-55°C
Temperatura maxima de lucru
125°C
Standards/Approvals
RoHS Compliant
Shrink Temperature
115°C
Serie
GAST
Tara de origine
China
Detalii produs
RS Solder Sleeves
Heat-Shrinkable sleeves that provide strain relief, insulation, moisture resistance and protection for terminations from environmental damage. The transparent heat-shrinkable sleeve contains a pre-measured fluxed solder band and coloured hot-melt glue at each end. A labour-saving alternative to conventional wire and cable termination methods such as hand soldering or crimping. The solder sleeves are available in a range of sizes to suit cable diameters from 0.5 mm² to 22 mm², or as an assorted kit.