RS PRO BD Series Signal Conditioner, Current/Voltage Input, Relay Output, 230 V ac Supply
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProProduct Type
Signal Conditioner
Input Signal Type
Current/Voltage
Output Signal Type
Relay
Input Range
4 to 20 mA
Tensiunea de alimentare
230 V ac
Hazardous Area Certification
No
Montare
DIN Rail
Tip terminal
Screw
Temperatura maxima de lucru
45°C
Frecventa minima de auto-rezonanta
0°C
Protectie IP
IP20
Standards/Approvals
No
Serie
BD
Tara de origine
United Kingdom
Detalii produs
BD120 Dual Level Trip Amplifier
RS Pro dual level trip amplifiers operate from a single process input, with a dual trip action. This output can be arranged so that the alarm condition is triggered either above or below the defined set point. The relay can also be configured for a Fail-Safe (energised in the stable state to de-energise in the alarm state) or Non-Fail Safe (de-energised in the stable state to energise in the alarm state) operation.
Informatii despre stoc temporar indisponibile
€ 241,26
€ 241,26 Buc. (fara TVA)
€ 291,92
€ 291,92 Buc. (cu TVA)
1
€ 241,26
€ 241,26 Buc. (fara TVA)
€ 291,92
€ 291,92 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProProduct Type
Signal Conditioner
Input Signal Type
Current/Voltage
Output Signal Type
Relay
Input Range
4 to 20 mA
Tensiunea de alimentare
230 V ac
Hazardous Area Certification
No
Montare
DIN Rail
Tip terminal
Screw
Temperatura maxima de lucru
45°C
Frecventa minima de auto-rezonanta
0°C
Protectie IP
IP20
Standards/Approvals
No
Serie
BD
Tara de origine
United Kingdom
Detalii produs
BD120 Dual Level Trip Amplifier
RS Pro dual level trip amplifiers operate from a single process input, with a dual trip action. This output can be arranged so that the alarm condition is triggered either above or below the defined set point. The relay can also be configured for a Fail-Safe (energised in the stable state to de-energise in the alarm state) or Non-Fail Safe (de-energised in the stable state to energise in the alarm state) operation.