RS PRO Axial Indicator Light, Clear, 6.5 V, 250 mA, 5000h
Documente tehnice
Specificatii
Marca
RS ProTensiune nominala
6.5 V
Baza lampa
Axial
Curent nominal
250 mA
Diametru
7mm
Lamp Size
T6.2
Lungime
20 mm
Culoare lentila
Clear
Luminozitate
5 lm
Durata de viata
5000h
Tara de origine
Korea, Republic Of
Detalii produs
T6.2 x 25 Wire-Ended Axial
Wire-Ended & Bi-Pin
Filament lamps will perform to specification and give optimum life when:,a) They are powered at the rated voltage from a stabilised 50Hz ac supply,b) Ambient temperature is in the range 20 to 25°C,c) No mechanical vibration is present.,Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA). Operation from a dc supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care therefore should be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 1,09
Buc. (Intr-un pachet de 10) (fara TVA)
€ 1,297
Buc. (Intr-un pachet de 10) (cu TVA)
10
€ 1,09
Buc. (Intr-un pachet de 10) (fara TVA)
€ 1,297
Buc. (Intr-un pachet de 10) (cu TVA)
10
Documente tehnice
Specificatii
Marca
RS ProTensiune nominala
6.5 V
Baza lampa
Axial
Curent nominal
250 mA
Diametru
7mm
Lamp Size
T6.2
Lungime
20 mm
Culoare lentila
Clear
Luminozitate
5 lm
Durata de viata
5000h
Tara de origine
Korea, Republic Of
Detalii produs
T6.2 x 25 Wire-Ended Axial
Wire-Ended & Bi-Pin
Filament lamps will perform to specification and give optimum life when:,a) They are powered at the rated voltage from a stabilised 50Hz ac supply,b) Ambient temperature is in the range 20 to 25°C,c) No mechanical vibration is present.,Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA). Operation from a dc supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care therefore should be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.