RS PRO 1000μF Aluminium Electrolytic Capacitor 100V dc, Radial, Through Hole
![brand-logo](https://media.rs-online.com/brand/M3385-01.jpg)
Documente tehnice
Specificatii
Polarised
Polar
Dimensiuni
94 x 94 x45mm
Frecventa minima de auto-rezonanta
-40°C
Temperatura maxima de lucru
+105°C
Leakage Current
<=0.01 CV or 3 μA @ 1 min
USB Version
USB2.0
Durata de viata
2000h
Pitch de plumb
7.5mm
Toleranta
±20%
Diametru
18mm
Dissipation Factor
10%
Tensiune
100V dc
Curent de ondulare
1.25A
Lungime
41mm
Inaltime
41mm
Capacitate
1000µF
Dimensiune celula
RS
Marca
RS ProDimensiuni
18 (Dia.) x 41mm
Tara de origine
Taiwan, Province Of China
Detalii produs
Corintech FilesThruTheAir WiFi-Alert Monitoring System
The WiFi-Alert is a standalone monitoring system for all data loggers in the FilesThruTheAir™ WiFi range. The WiFi-Alert will receive alarm messages from any FilesThruTheAir™ WiFi sensor connected to the same wireless network. The WiFi-Alert indicates an alarm activation using high brightness LEDs and a choice of 9 alarm tones. The WiFi-Alert will also continue to work when the PC is turned off.
The WiFi-Alert has been designed to be continuously powered via the mains however it does contain a rechargeable lithium polymer battery for device positioning and limited power during the event of a mains failure.
The audible alarm can be muted by pressing the WiFi-Alert button once or remotely from the PC software. There is also a configurable auto-mute function.
After initial set-up audible and visual alerts can be reconfigured wirelessly from the PC software. The audible and visual WiFi signal strength indicator is activated by pressing the WiFi-Alert button three times. All LEDs and a fast beep indicate a strong signal. Limited LEDs and slow beep indicate a weak signal.
The WiFi-Alert has an IP44 rating and can be attached to a wall or flat surface using the bracket or adhesive pad provided. It is also supplied with a micro USB lead and mains charger.
Supplied with
Micro USB lead, wall bracket, sticky pad, rechargeable Lithium Polymer battery, mains charger
Standards
IEEE 802.11
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 2,23
Buc. (Intr-o punga de 50) (fara TVA)
€ 2,654
Buc. (Intr-o punga de 50) (cu TVA)
50
€ 2,23
Buc. (Intr-o punga de 50) (fara TVA)
€ 2,654
Buc. (Intr-o punga de 50) (cu TVA)
50
Cumpara in pachete mari
Cantitate | Pret unitar | Per Punga |
---|---|---|
50 - 200 | € 2,23 | € 111,50 |
250 - 450 | € 2,06 | € 103,00 |
500+ | € 1,91 | € 95,50 |
Documente tehnice
Specificatii
Polarised
Polar
Dimensiuni
94 x 94 x45mm
Frecventa minima de auto-rezonanta
-40°C
Temperatura maxima de lucru
+105°C
Leakage Current
<=0.01 CV or 3 μA @ 1 min
USB Version
USB2.0
Durata de viata
2000h
Pitch de plumb
7.5mm
Toleranta
±20%
Diametru
18mm
Dissipation Factor
10%
Tensiune
100V dc
Curent de ondulare
1.25A
Lungime
41mm
Inaltime
41mm
Capacitate
1000µF
Dimensiune celula
RS
Marca
RS ProDimensiuni
18 (Dia.) x 41mm
Tara de origine
Taiwan, Province Of China
Detalii produs
Corintech FilesThruTheAir WiFi-Alert Monitoring System
The WiFi-Alert is a standalone monitoring system for all data loggers in the FilesThruTheAir™ WiFi range. The WiFi-Alert will receive alarm messages from any FilesThruTheAir™ WiFi sensor connected to the same wireless network. The WiFi-Alert indicates an alarm activation using high brightness LEDs and a choice of 9 alarm tones. The WiFi-Alert will also continue to work when the PC is turned off.
The WiFi-Alert has been designed to be continuously powered via the mains however it does contain a rechargeable lithium polymer battery for device positioning and limited power during the event of a mains failure.
The audible alarm can be muted by pressing the WiFi-Alert button once or remotely from the PC software. There is also a configurable auto-mute function.
After initial set-up audible and visual alerts can be reconfigured wirelessly from the PC software. The audible and visual WiFi signal strength indicator is activated by pressing the WiFi-Alert button three times. All LEDs and a fast beep indicate a strong signal. Limited LEDs and slow beep indicate a weak signal.
The WiFi-Alert has an IP44 rating and can be attached to a wall or flat surface using the bracket or adhesive pad provided. It is also supplied with a micro USB lead and mains charger.
Supplied with
Micro USB lead, wall bracket, sticky pad, rechargeable Lithium Polymer battery, mains charger
Standards
IEEE 802.11