Reliance Water Controls Stainless Steel Stopcock, 1/2in
Documente tehnice
Specificatii
Conexiune
1/2 in BSP Male
Tip material
Stainless Steel
Utilizare cu
Cold Water, Hot Water
Operating Pressure
5bar
Conexiune
Male
Dimensiune conducta 1
1/2in
Temperatura de lucru
-10 → +99 °C
Tara de origine
Italy
Detalii produs
Potable Water Shock Arrestor
Potable water shock arrestors are designed to prevent water hammer. Water hammer is caused by shock waves running through the water system which create noise or in severe cases pipe movement within a system, reverberations are a series of shock waves in quick succession. The pressure wave in such circumstances can be up to three times greater than the standing pressure. Water hammer occurs when the flow rate is suddenly changed.
The solution is to fit a shock arrestor directly before the affected fitting. The shock arrestor is a mini expansion vessel, which works by absorbing the shock wave from the fitting so it does not travel through the system and cause a noise, the closer the shock arrestor is installed to the fitting the better
Approvals
WRAS Approved
Expansion Vessels
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 78,55
Buc. (fara TVA)
€ 93,47
Buc. (cu TVA)
1
€ 78,55
Buc. (fara TVA)
€ 93,47
Buc. (cu TVA)
1
Cumpara in pachete mari
| Cantitate | Pret unitar |
|---|---|
| 1 - 9 | € 78,55 |
| 10 - 24 | € 72,62 |
| 25 - 49 | € 69,68 |
| 50+ | € 66,78 |
Documente tehnice
Specificatii
Conexiune
1/2 in BSP Male
Tip material
Stainless Steel
Utilizare cu
Cold Water, Hot Water
Operating Pressure
5bar
Conexiune
Male
Dimensiune conducta 1
1/2in
Temperatura de lucru
-10 → +99 °C
Tara de origine
Italy
Detalii produs
Potable Water Shock Arrestor
Potable water shock arrestors are designed to prevent water hammer. Water hammer is caused by shock waves running through the water system which create noise or in severe cases pipe movement within a system, reverberations are a series of shock waves in quick succession. The pressure wave in such circumstances can be up to three times greater than the standing pressure. Water hammer occurs when the flow rate is suddenly changed.
The solution is to fit a shock arrestor directly before the affected fitting. The shock arrestor is a mini expansion vessel, which works by absorbing the shock wave from the fitting so it does not travel through the system and cause a noise, the closer the shock arrestor is installed to the fitting the better
Approvals
WRAS Approved