Prysmian Black PE Cable clip, 16.7mm Max. Bundle
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
PrysmianCable Clip/Clamp Style
Cable Clip
Maximum Bundle Diameter
16.7mm
Affixing Method
Nut
Material
PE
Culoare
Black
Lungime
36mm
Latime
14 mm
Adancime
22mm
Dimensiuni
36 x 14 x 22mm
Tara de origine
United Kingdom
Detalii produs
Telcleat® Cable Cleats
Single hole fixing cleats, they are adjustable in diameter to accommodate a range of cable sizes. Manufactured from low density black polythene, which has good resistance to sunlight and a wide range of chemicals and oils.,Fixing Method - The cleat is opened up and placed around the cable so that the end of the cleat containing the slot will be in contact with the mounting surface. Except for stock no. 612-877, which should be reversed so that the slot is uppermost. In this case an M5 washer should be used to prevent the nut entering the slot in the cleat.
€ 37,52
€ 37,52 1 Box of 25 (fara TVA)
€ 45,40
€ 45,40 1 Box of 25 (cu TVA)
1
€ 37,52
€ 37,52 1 Box of 25 (fara TVA)
€ 45,40
€ 45,40 1 Box of 25 (cu TVA)
Informatii despre stoc temporar indisponibile
1
Informatii despre stoc temporar indisponibile
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 37,52 |
| 5 - 9 | € 35,35 |
| 10+ | € 33,20 |
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
PrysmianCable Clip/Clamp Style
Cable Clip
Maximum Bundle Diameter
16.7mm
Affixing Method
Nut
Material
PE
Culoare
Black
Lungime
36mm
Latime
14 mm
Adancime
22mm
Dimensiuni
36 x 14 x 22mm
Tara de origine
United Kingdom
Detalii produs
Telcleat® Cable Cleats
Single hole fixing cleats, they are adjustable in diameter to accommodate a range of cable sizes. Manufactured from low density black polythene, which has good resistance to sunlight and a wide range of chemicals and oils.,Fixing Method - The cleat is opened up and placed around the cable so that the end of the cleat containing the slot will be in contact with the mounting surface. Except for stock no. 612-877, which should be reversed so that the slot is uppermost. In this case an M5 washer should be used to prevent the nut entering the slot in the cleat.